TH10 Datasheet, PDF (2/12 Pages) Texas Instruments – Thermal Cut-out

Introduction
Congratulations on your purchase of the Relative Humidity and Temperature Datalogger. This datalogger
measures and stores up to 32,000 temperature. The user can easily set up the logging rate, high/low alarm and
start-mode, and download the stored data by plugging the module into a PC's USB port and running the supplied
PC software. Temperature data can then be graphed, printed and exported to other applications. The data
logger is supplied with a long-life lithium battery, which can typically allow logging for one year. This meter is
shipped fully tested and calibrated and, with proper use, will provide years of reliable service
Features
ƒ Memory for 32,000 readings
ƒ Selectable data sampling rate: 2s, 5s, 10s, 30s, 1m, 5m, 10m, 30m, 1hr, 2hr, 3hr, 6hr, 12hr, 24hr
ƒ Status Indication via Red/Yellow LED and Green LED
ƒ USB Interface for Set-up and Data Download
ƒ User-Programmable Alarm Thresholds for Temperature
ƒ Analysis software used to view graph
ƒ Long battery life
Description
1. Protective cover
2. USB connector to PC port
3. Start button
4. Temperature sensor
5. Alarm LED (red/yellow)
6. Record LED (green)
7. Mounting clip
2
TH10 V1.0 9/07