TG20 Datasheet, PDF (1/1 Pages) Extech Instruments Corporation. – Transmitter with output cables terminated in modular RJ11 phone connector

TG20
Wire Tracer Kit
Non-Contact probe
audibly identifies
selected wire or
cable. Easily trace
wires from source to
termination.
Features
• Transmitter with output cables terminated in
modular RJ11 phone connector
• Transmitter injects traceable signal into
cables, checks telephone lines, and performs
continuity checks
• Non-Contact probe audibly identifies
selected wire or cable
• Easily trace wires from source to termination
• Test for properly operating phone lines
• Adjustable sensitivity control improves wire
identification and eliminates false detection
• Continuity test — visible indication
• Dimensions/Weight:
Probe - 8.7x2x1.3” (220x50x32mm)/ 3.2oz (91g);
Transmitter - 2.6x2.7x1.1” (65x68x28mm)/ 3.2oz (91g)
• Complete with Wire Tracer Probe and Transmitter with
RJ11 phone connector and pair of alligator clips, and
two 9V batteries
Applications
• Identify wire pairs
• Trace telephone cables
• Check continuity
• Test telephone line condition
Ordering
TG20.................. Wire Tracer Kit
Specifications subject to change without notice. Copyright © 2012-2013 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form.
Rev. 11/12/13
www.extech.com