RT30_15 Datasheet, PDF (1/1 Pages) Extech Instruments Corporation. – Wireless Remote AC Circuit Identifier

Wireless Remote AC Circuit Identifier
Virtual electrician’s helper remotely identifies and confirms correct circuit is opened
Combines non-contact voltage and light detection with RF (Radio Frequency) transmission technology. It enables a single user to identify mid-run
wires and to find the breaker that powers a circuit or light fixture without having to connect directly to the wires in
the cable.
Features:
• Simplify mid-run wiring jobs by easily identifying the correct
circuit powering the cable to be spliced or repaired
• The innovative RT30 combines non-contact voltage detection
with wireless signals to monitor and remotely report the
presence of voltage on a wire
• Clamped onto a live wire, the transmitter signals the user at
the breaker panel with LED and audible alerts on the receiver
(up to 100m range). The alerts stop when the correct circuit
breaker is switched and work can then be performed safely.
• Eliminates the need for an assistant or back-and-forth trips to
confirm the correct circuit is powered down
• The RT30’s clamp-style probe accessory is ideal for
wires that are hard to isolate or reach
• Plus, easily identify lighting and outlet circuits
with the built-in light sensor
• Includes transmitter, receiver, remote clamp-style probe,
four “AAA” batteries, and pouch case
The RT30/RT32 Wireless AC Circuit Identifier
is a convenient, must-have tool for:
• Electricians
• Plumbers
• General contractors
• Do-it-yourselfers
• Kitchen and bath remodelers
• Lighting installers
• Handymen
• Anyone who needs a virtual electrician's helper
Easy to Use:
Patented
1. Clamp the transmitter directly onto
installed wiring to detect voltage.
2. The receiver alerts the user at the
breaker panel with a voltage-present
LED indicator and audible beep.
3. Alerts cease when the right circuit
breaker is switched off or a junction
splice is opened in the circuit.
The compact, clamp-style probe accessory can
be used on wires that are hard to isolate or
reach, or where the RT30 transmitter cannot fit.
Specifications
Display
Controls
Transmission Frequencies
Transmission Distance
Detect Status
Transmitter Unit
Power, Detect, External Probe LEDs
3-position slide switch
(RT30) 914MHz
(RT32) 868MHz
~100m in an unobstructed field
Visual
Receiver Unit
Power, Detect, Communications LED
3-position slide switch
N/A
N/A
N/A
Visual and Audible
Ordering Information:
RT30 ..............Wireless AC Circuit Identifier (914MHz) w/External Probe
RT32 ..............Wireless AC Circuit Identifier (869MHz) w/External Probe
(NOTE: USA, Mexico, and Canada use 914MHz model and majority of other countries use 869MHz model)
www.extech.com
Specifications subject to change without notice.
6/23/09 - R1
Copyright © 2009 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.