|
PRT200 Datasheet, PDF (1/1 Pages) Extech Instruments Corporation. – Non-Contact Phase Sequence Tester | |||
|
Non-Contact Phase Sequence Tester
Checks phase sequence and phase status
Tests up to 1000VAC with LED and audible indication
Features:
⢠75 to 1000VAC input voltage with 45 to 65Hz frequency range
⢠LEDs indicate phase orientation (clockwise or counter-clockwise)
and whether each phase is live
⢠Beeper sounds intermittently when correct phase is detected and
continuously if phase is reversed
⢠Durable housing with back cover magnet for attachment to an AC
distribution panel for easy measurement
⢠Adjustable Hi/Lo LED brightness switch for making measurements in
dimly lit areas or sunlight
⢠Fully insulated alligator clips with wide jaws
⢠Low battery warning
⢠CAT IV-600V safety rating
⢠Dimensions: 4.7 x 2.7 x 1.5" (118 x 69 x 38mm);
Weight: 13oz (370g)
⢠Complete with three built-in 30" test leads with large color-coded
alligator clips, four AA batteries, and pouch case
Ordering Information:
PRT200 ........Non-Contact Phase Sequence Tester
www.extech.com
Specifications subject to change without notice.
07/20/11 - R1
Copyright © 2011 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
|