MS6060 Datasheet, PDF (1/2 Pages) Extech Instruments Corporation. – 2-Channel Digital Oscilloscopes

MS6000 Series 2-Channel
Digital Oscilloscopes
A
B
C
D
E
F
5.6" (142mm) graphical color
LCD for viewing multiple
waveforms plus built-in
digital multimeter display
and analog bargraph.
DISPLAYS:
A. Oscilloscope
B. Dual Channel
C. Multimeter
D. Pass/Fail Test
E. Reference
F. X/Y Format
Features
• Three models to choose from:
- Model MS6060 — 60MHz bandwidth
- Model MS6100 — 100MHz bandwidth
- Model MS6200 — 200MHz bandwidth
• One-touch automatic setup optimizes the position,
range, timebase, and triggering to assure a stable
display of virtually any waveform
• Easy-to-use pop-up menu with built-in
multi-language system
• 23 Automatic Measurements
• Waveform Math: Add, Subtract, Multiply, and Divide
• Store and recall up to 1000 waveform screens and
setups using the installed 2G microSD card
• Automatic cursor tracking measurements
• XY Mode
• Built-in FFT function converts a time-domain signal
into its frequency components to measure harmonic
content and distortion in systems
• Waveform Recorder to capture/replay input
waveforms from CH1 and CH2 with a maximum
record length of 1000 frames
• Pass-Fail function compares a stored waveform
to an unknown input
• Average Mode for smoothing waveforms
• Square Wave Output (2V, 1kHz) for probe adjustment
• Built-in 6,000 count True RMS MultiMeter with
analog bargraph
• Complete with two 1X/10X oscilloscope probes,
test leads, 7.4V Li-Ion battery, universal AC charger,
and carrying case
Specifications subject to change without notice. Copyright © 2012 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
Rev. 6/22/12
www.extech.com