EX840 Datasheet, PDF (1/1 Pages) Extech Instruments Corporation. – CAT IV 1000A Clamp Meter + IR Thermometer

CAT IV 1000A Clamp Meter + IR Thermometer
Industrial Clamp-on multimeter with CAT IV-600V safety rating
Ideal for industrial applications, this full-size True RMS 1000A AC/DC Clamp features a built-in
Infared Thermometer and rugged double molded housing.
EX840 CAT IV Clamp Meter Features:
• Built-in non-contact IR Thermometer with laser pointer
• True RMS Current and Voltage measurements
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, Resistance,
Capacitance, Frequency, Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM
or two 500MCM
• 4000 count backlit display
• Features include Data Hold and Min/Max and Auto Power off
• Autoranging with manual range button
• Complete with CAT IV test leads, 9V battery, general purpose
Type K probe, pouch case, and Professional Test Lead Set
Professional Test Lead Features:
• 8-Piece Professional Test Lead set
• Two 42" (1m) PVC lead extensions with shrouded
banana plugs at both ends
• Two modular 4" (102mm) Heavy Duty test probe
handles with 0.16" (4mm) banana plug tip
• Two standard size, alligator clips with insulated rubber boot
• Two extra large, double-insulated, alligator clips with sharp
teeth for piercing insulated wire. Jaws open to 0.8" (20mm)
Includes:
Pouch case to store the meter, temperature
probe, and test leads. The additional 8pc
set Professional Test Leads are packaged
separately.
CAT IV -600V safety rating for
added protection and True RMS
feature gives you accurate readings
of non-sinusoidal waveforms.
Built-in IR Thermometer with
laser pointer is an excellent
troubleshooter for locating hot
spots and overheating motors.
Ordering Information:
EX840 ..................1000A AC/DC True RMS Clamp/DMM+IR Thermometer
EX840-NISTL*......EX840 with Limited NIST for Certificate of Traceability
*NISTL - Limited NIST for Certificate of Traceability to all functions except IR Thermometer
Specifications
AC Current
DC Current
AC Voltage
DC Voltage
Resistance
Capacitance
Frequency
IR Temperature
Type K Temperature
Continuity
Inrush
Diode
Dimensions
Weight
Range
0.1 to 1000A
0.1 to 1000A
0.1mV to 1000V
0.1mV to 1000V
0.1 to 40MΩ
0.001nF to 40,000μF
0.001kHz to 4kHz
-58 to 518ºF (-50 to 270ºC)
-4 to 1400ºF (-20 to 760ºC)
Yes
Yes
Yes
10.6x4.3x2" (270x110x50mm)
13.6oz (386g)
Basic Accuracy
±2.8%
±2.8%
±1.5%
±2.8%
±1.5%
±3.0%
±1.5%
±2.0% rdg or ±4ºF/±2ºC
±(3%rdg+9°F/5ºC)
www.extech.com
Specifications subject to change without notice.
1/19/12 - R1
Copyright © 2009-2011 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.