EX800 Datasheet, PDF (1/1 Pages) Extech Instruments Corporation. – ExStik® 4-in-1 Water Quality Meter Kits

ExStik^® 4-in-1 Water Quality Meter Kits
Surface measurements of Chlorine, pH, or ORP
Using a flat surface electrode
Features:
• 4-in-1 Water Quality Meter measures Chlorine, pH, ORP plus
Temperature with interchangeable flat surface electrodes (included)
• Flat surface electrodes work in liquids, semi-solids and solids
• Memory stores and recalls 15 readings and saves last calibrated value
• Large 3-1/2 digit (2000 count) Digital display with bargraph
(pH bargraph originates at neutral point 7.00pH)
• Automatic electronic self calibration for Chlorine and ORP;
1, 2 or 3 point buffer calibration for pH
• Data Hold, Auto shut-off and low battery indication
• Waterproof design floats in wet environment (IP57)
• Direct reading of Total Chlorine from low detection limit;
Unaffected by sample color or turbidity
• Simultaneous display of ppm or pH and °C/°F Temperature
• Smart chip predicts pH electrode performance with "RENEW" indicator
when replacement is needed
• "CAL" indicator alerts user to recalibrate pH electrode
• Automatic Temperature Compensation
• EX900 Kit Complete with ExStik® Chlorine meter, gel filled pH
electrode, ORP electrode, protective sensor cap, 5 packs of
10 reagent tablets (50 tests), 4 plastic sample cups,
weighted stand, pH 4, 7 & 10buffer packs,
four 3V SR44W batteries, carrying case, and neckstrap
• EX900-R Kit is same as EX900 but includes a refillable pH electrode
• EX800 Kit is same as EX900 but excludes ORP electrode
ExStik^® Kit includes all the
necessary accessories to
measure Chlorine, pH, ORP,
and Temperature.
Patents Pending
Ordering Information:
EX900 ......ExStik^® Kit 4-in-1 (pH – gel filled, ORP, Chlorine, Temperature)
EX900-R....ExStik^® Kit 4-in-1 (pH – refillable, ORP, Chlorine, Temperature)
EX800 ......ExStik^® Kit 3-in-1 (pH, Chlorine, Temperature)
PH103 ......Tripak buffers (6ea. of 4, 7, 10pH & 2 Rinsing solutions)
PH105 ......Spare pH electrode
PH115 ......Spare Refillable pH ExStik^® Electrode Module
CL203........Reagent tablets (10pk - 100 tests)
CL204........Reagent tablets (100pk - 1000 tests)
CL205........Spare Chlorine electrode
RE305 ......Spare ORP electrode
EX007 ......Spare sample solution cups with caps (24pk)
EX010 ......Extension Cable, 3ft (1 Meter) with probe weight for ExStik
EX050 ......Extension Cable, 16ft (5 Meter) with probe weight for ExStik
Specifications
pH
ppm
mV
Temperature
Resolution
Accuracy
Power
Dimensions
Weight
Chlorine
pH
—
0.00 to 14.00pH
0.01 to 10.00ppm
—
—
—
23° to 194°F (-5 to 90°C)
23° to 194°F (-5 to 90°C)
0.01ppm
0.01pH
±10% of rdg. + 0.01ppm
±0.01pH
four 3V CR-2032 button batteries
1.4 x 6.8 x 1.6” (35.6 x 172.7 x 40.6mm)
3.85oz (110g)
ORP
—
—
-999 to 999mV
—
4mV
±1mV
www.extech.com
Specifications subject to change without notice.
1/2/15 - R1
Copyright © 2009-2015 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form.