DCP42 Datasheet, PDF (1/1 Pages) Extech Instruments Corporation. – DCP42 160W Single Continuous Switching Power Supply with USB

DCP42 160W Single Continuous
Switching Power Supply with USB
Continuous switching Power Supply offers high
efficiency electrical power conversion for greater
energy conservation and lighter weight.
Applications:
- Laboratory use
- Bench Testing, Service, and Repair
- Research and Development facilities
- Educational and Institutional Training
Features
• Constantly calculates and adjusts the Voltage
and Current limit points according to available
maximum power (160W)
• At maximum current (10A), voltage is limited to 16V;
at maximum voltage (42V), current is limited to 3.8A
• Dual action rotary encoder control with push
knob for fine and coarse tuning
• Remote control for Programming, Output Voltage/
Current, and ON/OFF using supplied software, driver,
and USB
• Three on-board user-defined Voltage/Current presets
• Store 20 presets with up to 999 cycles each on a PC
via USB and supplied Software
• Software also includes DC Ramp and
Waveform Generator
• Complete with power cord, software, and USB cable
Specifications
Output Voltage
Output Current
Basic Accuracy
Load Voltage Regulation
Line Voltage Regulation
Load Current Regulation
Line Current regulation
Ripple and Noise
Dimensions/ Weight
0 to 42V
0 to 10A
±(0.2%+5 counts)
≤0.15% (10-100% rated current)
≤0.02% (90-264V AC)
≤0.5% (10-90% rated voltage)
≤0.1% (90-264V AC)
≤5m Vrms, ≤50m Vp-p
7.9 x 3.7 x 9.5” (200 x 95 x 245mm)/ 5lbs (2.3kg)
Ordering
DCP42............... 160W Single Continuous Switching Power Supply with USB (100-240V)
Specifications subject to change without notice. Copyright © 2013 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form.
Rev. 4/18/13
www.extech.com