42535 Datasheet, PDF (1/4 Pages) Extech Instruments Corporation. – Mini IR Thermometer with Type K Input

User’s Guide
Mini IR Thermometer
with Type K Input
Model 42535
Introduction
Congratulations on your purchase of Extech’s 42535 IR Thermometer. This device offers
non-contact infrared temperature measurement capability. The built-in laser pointer
increases target accuracy. Type K thermocouple functionality is also built-in. Proper use
and care of this meter will provide years of reliable service.
Safety
1. Use extreme caution when the laser beam is ON
2. Do not point the beam toward anyone's eyes
3. Be careful not to let the beam strike the eye from a reflective surface
4. Do not use the laser near explosive gases or in other potentially
explosive areas
Warranty
EXTECH INSTRUMENTS CORPORATION warrants the basic instrument to be free of defects in parts and
workmanship for one year from date of shipment (a six month limited warranty applies on sensors and cables). If it
should become necessary to return the instrument for service during or beyond the warranty period, contact the
Customer Service Department at [phone] EXTENSION 210 for authorization or visit www.extech.com for
more information. A Return Authorization (RA) number must be issued before any product is returned to
Extech. The sender is responsible for shipping charges, freight, insurance and proper packaging to prevent
damage in transit. This warranty does not apply to defects resulting from action of the user such as misuse,
improper wiring, operation outside of specification, improper maintenance or repair, or unauthorized modification.
Extech specifically disclaims any implied warranties or merchantability or fitness for a specific purpose and will not
be liable for any direct, indirect, incidental or consequential damages. Extech's total liability is limited to repair or
replacement of the product. The warranty set forth above is inclusive and no other warranty, whether written or
oral, is expressed or implied.
Copyright © 2005 Extech Instruments Corporation.
All rights reserved including the right of reproduction in whole or in part in any form.