EMS101-P Datasheet, PDF (1/2 Pages) Excelics Semiconductor, Inc. – DC-6GHz GaAs MMIC SPDT SWITCH

UPDATED 03/31/2008
EMS101-P
DC-6GHz GaAs MMIC SPDT SWITCH
FEATURES
z BROADBAND PERFORMANCE
z HIGH ISOLATION
z LOW INSERTION LOSS
z LOW DC POWER CONSUMPTION
z FAST SWITCHING SPEED
z SI3N4 PASSIVATION
z ADVANCED EPITAXIAL HETEROJUNCTION
PROFILE PROVIDES HIGH RELIABILITY
Caution! ESD sensitive device.
DESCRIPTION
The EMS101-P is a GaAs IC single pole double throw broadband RF switch. It can be used for broadband
communications and instrument application. This device is packaged in a SO-8 surface mount package and
internally it can be terminated with 50ohm load or short circuit based on requirement .The switch is controlled by
the application of 0V/-5V signals to the control lines in accordance with the truth table below.
ELECTRICAL CHARACTERISTICS (T_a = 25 ^OC)
SYMBOL
PARAMETERS/TEST CONDITIONS
F
Operating frequency Range
MIN TYP MAX UNIT
DC
6
GHz
0/-5V Control; 50MHz
20
dBm
P1dB Input Power at 1dB Gain compression
0/-5V Control; 2GHz
26
dBm
Insertion Loss
Ls
(DC-3GHz)
(3-6GHz)
1
1.5
dB
1.5
2
dB
Isolation
ISO
(DC-3GHz)
(3-6GHz)
30
32
dB
25
28
dB
VSWR in Input VSWR
1.8
VSWR out Output VSWR
1.8
T
Switching Speed (50% control to 10%/90%RF)
3
8
nS
Note:
1.
2.
3.
VSWR measured in low loss switch state
P1dB measured input power at which insertion loss compressed by 1dB
All measurement made in a 50Ohm system
Specifications are subject to change without notice.
Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085
Phone: [phone] Fax: [phone] Web: www.excelics.com
page 1 of 2
Revised March 2008