EMP107-Q5 Datasheet, PDF (1/4 Pages) Excelics Semiconductor, Inc. – 5.8 - 8.0 GHz Surface-Mounted PA

UPDATED: 11/12/2007
EMP107-Q5
5.8 – 8.0 GHz Surface-Mounted PA
FEATURES
• 5.8 – 8.0 GHz Operating Frequency Range
• 24.0dBm Output Power at 1dB Compression
• 18.0 dB Typical Small Signal Gain
• -40dBc OIMD3 @Each Tone Pout 14dBm
APPLICATIONS
• Point-to-point and point-to-multipoint radio
• Military Radar Systems
Caution! ESD sensitive device.
ELECTRICAL CHARACTERISTICS (T_a = 25 °C, 50 ohm, VDD=7V, IDQ=200mA)
SYMBOL
PARAMETER/TEST CONDITIONS
MIN TYP MAX UNITS
F
Operating Frequency Range
5.8
8.0 GHz
P1dB Output Power at 1dB Gain Compression
22.5 24.0
dBm
Gss
Small Signal Gain
15.0 18.0
dB
OIMD3
Output 3^rd Order Intermodulation Distortion
@∆f=10MHz, Each Tone Pout 14dBm, 7V, 60%+10%Idss
-40 -37
dBc
Input RL Input Return Loss
-10
dB
Output RL Output Return Loss
-5
dB
Idss
V_DD
Rth
Saturate Drain Current
Power Supply Voltage
Thermal Resistance¹
V_DS =3V, V_GS =0V
240 310 370
mA
7
8
V
44
o_C/W
Tb
Operating Base Plate Temperature
-35
+85
ºC
ABSOLUTE MAXIMUM RATINGS FOR CONTINUOUS OPERATION^2,3
SYMBOL
CHARACTERISTIC
CONTINUOUS
V_DS
Drain to Source Voltage
8V
V_GS
Gate to Source Voltage
-4 V
I_DD
Drain Current
Idss
I_GSF
Forward Gate Current
4.5mA
P_IN
Input Power
@ 3dB compression
T_CH
Channel Temperature
150°C
T_STG
Storage Temperature
-65/150°C
P_T
Total Power Dissipation
2.6W
1. R_th is mounting dependent. Measured result when used with Excelics recommended evaluation board.
2. Operating the device beyond any of the above rating may result in permanent damage.
3. Bias conditions must also satisfy the following equation V_DS*I_DS < (T_CH –T_HS)/R_TH; where T_HS = ambient temperature
Specifications are subject to change without notice.
Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085
Phone: [phone] Fax: [phone] Web: www.excelics.com
Page 1 of 4
December 2007