|
XRT86SH328_3 Datasheet, PDF (81/119 Pages) Exar Corporation – VOYAGER - T1 FRAMER + LIU REGISTER DESCRIPTION | |||
|
◁ |
XRT86SH328
REV. 1.0.1
VOYAGER - T1 FRAMER + LIU REGISTER DESCRIPTION
TABLE 71: FRAMER INTERRUPT ENABLE REGISTER (FIER)
HEX ADDRESS: 0XNB05
BIT
FUNCTION
1 SE_ENB
TYPE
R/W
DEFAULT
DESCRIPTION-OPERATION
0
Synchronization Bit (CRC-6) Error Interrupt Enable
This bit permits the user to either enable or disable the âCRC-6 Error
Detectionâ Interrupt, within the XRT86SH328 device. If the user
enables this interrupt, then the Receive T1 Framer block will gener-
ate an interrupt when it detects a CRC-6 error within the incoming
T1 multiframe.
0 - Disables the âCRC-6 Error Detectionâ Interrupt.
1 - Enables the âCRC-6 Error Detectionâ Interrupt.
0 FE_ENB
R/W
0
Framing Bit Error Interrupt Enable
This bit permits the user to either enable or disable the âFraming
Alignment Bit Error Detectionâ Interrupt, within the XRT86SH328
device. If the user enables this interrupt, then the Receive T1
Framer block will generate an interrupt when it detects one or more
Framing Alignment Bit error within the incoming T1 data stream.
0 - Disables the âFraming Alignment Bit Error Detectionâ Interrupt.
1 - Enables the âFraming Alignment Bit Error Detectionâ Interrupt.
NOTE: Detecting Framing Alignment Bit Error doesn't not
necessarily indicate that synchronization has been lost.
79
|
▷ |