XRT7296 Datasheet, PDF (8/16 Pages) Exar Corporation – INTEGRATED LINE TRANSMITTER

XRT7296
DS3 SIGNAL REQUIREMENTS AT THE DSX
$
   ,+ /1/ /   /.  
1
* 21/1    / /    
 .     1 // / 1 // / A
 1  21  1   +  /1  1
3, . M/; 1
*  / /
 /./ 3+  + 1 +  >,   'Table 1)
1 "%) /  1,1 & .  . "!
/3+  1
* 
  
, +- 2 +  ,+   +  >,   AG
1 7  ,+   + 'See Table 3 and Figure
3(  1 4 ++/ *78*%% ,+   +  1
,+   3- 1 "%)   1 
  + 
Parameter
 
 
  
0,+ 1
02    +
Specification
")@3  ±  
4 + 21 1 * ,3, '49(
"& 
&.
 +  ,+ , . 1   +  Figure 3  Figure 4^ 1 ,+  +, -
3 /+  3-  / ./  . 1   +  1 ,+  +, , 3 3 *
2  )< ;  !&< ;  ,   1 /   . 1 ,+ 
$  ++      1 2   )! ± @:B , 3 *! 
D&"4  1 2   ") ± @:B , 3 *!4  *4^{ }
Notes
1 _{The pulse template proposed by G.703 standards is shown in Figure 4 and specified in Table 4 The proposed G.703 standards}
further state that the voltage in a time slot containing a 0 must not exceed
5% of the peak pulse amplitude, except for the residue
of preceding pulses.
2 _{The power levels specified by the proposed G.703 standards are identical except that the power is to be measured in 3kHz bands.}
3 _{The all 1s pattern must be a pure all 1s signal, without framing or other control bits.}
Table 2. DSX•3 Interconnection Specification
Lower Curve
Time
Equation
  *)
*)   D)
*
& N D ^ N D! OO*
D)  
*
Upper Curve
Time
Equation
 *)!
*)!    D )
D)
D
&N  D ^ N DOOD
&D" ^{*!'*)(}
Table 3. DSX-3 Pulse Template Boundaries for ANSI T1.404 Standards (See Figure 3. )
Lower Curve
Time
Equation
*!&    *)
*)    D)
*
& N D ^ N D !OO *
D)    D
*
Upper Curve
Time
Equation
*!&  *)!
*)!   D )
*)!   )
D
&N  D ^ N DOO D
!D" ^{*!'*)(}
Table 4. DSX-3 Pulse Template Boundaries for Bellcore TR-NWT-000499 Standards (See Figure 4)
  
!