SP3495E Datasheet, PDF (7/17 Pages) Exar Corporation – HIGH SPEED +3.3V RS-485/RS-422 TRANSCEIVERS WITH +/-15KV ESD PROTECTION AND ADVANCED FAILSAFE

SP3495E-3497E
REV. 1.0.0
HIGH SPEED +3.3V RS-485/RS-422 TRANSCEIVERS WITH +/-15KV ESD PROTECTION AND ADVANCED FAILSAFE
UNLESS OTHERWISE NOTED: VCC = +3.0V TO +3.6V WITH T_A FROM -40^OC TO +85^OC. TYPICAL VALUES ARE AT
VCC = +3.3V AND 25^OC.
SYMBOL
PARAMETERS
MIN.
Thermal Shutdown Hysteresis
ESD Protection at Pins A, B, Y and Z
TYP.
20
+/-15
MAX. UNITS
CONDITIONS
°C
kV Human Body Model
NOTE:
1.
2.
3.
Change in Magnitude of Differential Output Voltage and Change in Magnitude of Common Mode Output Voltage
are the changes in output voltage when DI input changes state.
The transceivers are put into shutdown by bringing RE High and DE Low simultaneously for at least 600ns. If the
control inputs are in this state for less than 50ns, the device is guaranteed not enter shutdown. If the enable inputs
are held in this state for at least 600ns the device is assured to be in shutdown. Note that the receiver and driver
enable times increase during shutdown
Gauranteed by design and bench characterization.
7