English
Language : 

SP504 Datasheet, PDF (6/32 Pages) Sipex Corporation – WAN Multi-Mode Serial Transceiver
SPECIFICATIONS
TA = +25°C and VCC = +5.0V unless otherwise noted.
PARAMETER
MIN.
RS-423 DRIVER (V.10) (continued)
HIGH Level Output, VT
LOW Level Output, VT
Short Circuit Current
+3.6
-6.0
0.9VOC
Power Off Current
Transition Time
Max. Transmission Rate
120
Propagation Delay tPHL
Propagation Delay tPLH
0.05
0.05
RS-423 RECEIVER (V.10)
TTL Output Levels
VOL
VOH
Input
HIGH Threshold
LOW Threshold
HIGH Input Current
LOW Input Current
Receiver Sensitivity
Input Impedance
Max. Transmission Rate
Propagation Delay tPHL
Propagation Delay tPLH
2.4
+0.3
-7.0
4
120
0.05
0.05
POWER REQUIREMENTS
VCC
4.75
ICC (No Mode Selected)
ICC (RS-232 Mode)
ICC (RS-422 Mode)
ICC (RS-449 Mode)
ICC (EIA-530 Mode)
ICC (EIA-530A Mode)
ICC (RS-485 Mode)
ICC (V.35 Mode)
ICC (V.36 Mode)
ENVIRONMENTAL AND MECHANICAL
Operating Temperature Range
0
Storage Temperature Range
-65
ESD
TYP.
0.5
0.5
0.2
0.2
5.00
30
140
320
320
320
320
370
210
310
500
MAX. UNITS CONDITIONS
+6.0
-3.6
+/-150
+/-100
100
2
2
Volts
Volts
Volts
mA
µA
ns
kbps
µs
µs
RL = 450Ω; VOUT ≥0.9VOC
RL = 450Ω; VOUT ≥0.9VOC
TA = +25°C, VCC = +5.0V
VOUT = 0V, VCC = +5.0V
VCC = 0V, VOUT = +/-0.25V
Rise/Fall time, between +/-3V
RL = 450Ω
TA @ 25°C and VCC = +5V only.
Measured from 1.5V of VIN to 50%
of VOUT; RL = 450Ω
0.4
Volts
Volts
+7.0
-0.3
+/-0.3
1
1
Volts
Volts
Volts
kΩ
kbps
µs
µs
Refer to Receiver input graph
Refer to Receiver input graph
VCM = +7V to -7V
VIN = +10V to -10V
TA @ 25°C and VCC = +5V only
Measured from 50% of VIN to 1.5V
of VOUT
5.25
Volts
mA
mA
mA
mA
mA
mA
mA
mA
mA
All ICC values are with VCC = +5V
fIN = 120kbps; Drivers loaded
fIN = 2Mbps; Drivers loaded
fIN = 2Mbps; Drivers loaded
fIN = 2Mbps Drivers loaded
fIN = 2Mbps Drivers loaded
fIN = 2Mbps Drivers loaded
fIN = 2Mbps Drivers loaded
fIN = 2Mbps Drivers loaded
+70
+150
°C
°C
V HBM
Exar Corporation 48720 Kato Road, Fremont CA, 94538 • 510-668-7017 • www.exar.com

SP504_102_121708