SP337EBEY-L Datasheet, PDF (5/18 Pages) Exar Corporation – 3.3V TO 5V RS-232/RS-485/RS-422 MULTIPROTOCOL TRANSCEIVER

REV. 1.0.2
SP337E
3.3V TO 5V RS-232/RS-485/RS-422 MULTIPROTOCOL TRANSCEIVER
ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections to the
specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability and cause permanent
damage to the device.
Supply Voltage V_CC
Receiver Input V_IN (DC Input Voltage)
Input Voltage at TTL input Pins
+6.0V
-16V to +16V
-0.3V to Vcc + 0.5V
Driver Output Voltage (from Ground)
-7.5V to +12.5V
Short Circuit Duration, TXout to GND
Continuous
Storage Temperature Range
-65°C to + 150°C
Lead Temperature (soldering, 10s)
+300°C
Power Dissipation 28-pin SOIC-W
(derate 17mW/°C above +70°C)
938mW
Power Dissipation 28-pin TSSOP
(derate 12mW/°C above +70°C)
657mW
CAUTION:
ESD (Electrostatic Discharge) sensitive device. Permanent damage may occur on unconnected devices subject to high energy electrostatic fields. Unused
devices must be stored in conductive foam or shunts. Personnel should be properly grounded prior to handling this device. The protective foam should be
discharged to the destination socket before devices are removed.
ELECTRICAL CHARACTERISTICS
UNLESS OTHERWISE NOTED: VCC = +3.3V +/-5% OR +5.0V +/-5%, C1-C4 = 0.1μF; TA = TMIN TO TMAX.
TYPICAL VALUES ARE AT VCC = 3.3V, TA = +25^OC.
SYMBOL
PARAMETERS
DC CHARACTERISTICS
MIN. TYP. MAX. UNITS
CONDITIONS
I_CC
Supply Current (RS-232)
I_CC
Supply Current (RS-485)
I_CC
Vcc Shutdown Current
(SP337EU only)
1.5 6.0 mA No Load, RS232/RS485 = 0V
7.0
15 mA No Load, RS232/RS485 = Vcc
1.0
10.0
μA
TXEN = 0V, RXEN = Vcc
(SP337EU only)
TRANSMITTER and LOGIC INPUT PINS: Pins 1, 2, 25, 26, 27, 28
V_IH
Logic Input Voltage HIGH
2.0
V_IH
Logic Input Voltage HIGH
2.4
V_IL
Logic Input Voltage LOW
0.8
I_IL
Logic Input Leakage Current
1.0
I_PU
Logic Input Pull-up Current
15.0
V_HYS
Logic Input Hysteresis
0.5
RS-232 and RS-485/422 RECEIVER OUTPUTS: Pins 19, 20, 21, 22, 23
V Vcc = 3.3V
V Vcc = 5.0V
V
μA Input High (Vin = Vcc)
μA Input Low (Vin = 0V)
V
V_OH
Receiver Output Voltage HIGH
V_OL
Receiver Output Voltage LOW
Vcc-0.6
V I_OUT = 1.0mA
0.4
V I_OUT = -3.2mA
5