SP3508 Datasheet, PDF (36/36 Pages) Sipex Corporation – Rugged 3.3V, 20Mbps, 8 Channel Multiprotocol Transceiver with Programmable DCE/DTE and Termination Resistors

ORDERING INFORMATION
Part Number
Temperature Range
Package Types
SP3508CF-L........................................... 0°C to +70°C................................................... 100–pin JEDEC LQFP
SP3508EF-L........................................ -40°C to +85°C................................................... 100–pin JEDEC LQFP
Date
1/12/04
2/27/04
3/31/04
6/03/04
10/12/04
10/29/04
7/17/08
Revision
A
B
C
D
E
F
1.0.0
REVISION HISTORY
Description
Implemented Tracking revision
Included Diamond column in spec table inidcating which specs apply over full
operating temperature range. Correct typo to Fig. 51 pin 61 and 62.
Corrected max dimension for symbol c on LQFP package outline
Added table to page 27 and 28
Certified conformance to NET1/NET2 and TBR-1/TBR-2 TUV by TUV Rhein-
land (Test report # TBR2/30451940.001/04)
Corrected V.28 Driver Open circuit values, pages 27 and 28 -- both for DCE
and DTE that BA(B) should connect to pin 14.
Change Revision format from letter code to number code. Change Logo,
footnote and notice statement from Sipex to Exar. Add T_J limits to Absolute
Maximum Ratings. Change propagation delay limit specification for V.11 and
V.35 Driver/Receiver from 60ns Maximum to 85ns Maximum. Update ordering
information to show only RoHS packaging (-L) is available.

Notice
EXAR Corporation reserves the right to make changes to any products contained in this publication in order to improve design, performance or reliabil-
ity. EXAR Corporation assumes no representation that the circuits are free of patent infringement. Charts and schedules contained herein are only for
illustration purposes and may vary depending upon a user's specific application. While the information in this publication has been carefully checked;
no responsibility, however, is assumed for inaccuracies.
EXAR Corporation does not recommend the use of any of its products in life support applications where the failure or malfunction of the product can
reasonably be expected to cause failure of the life support system or to significantly affect its safety or effectiveness. Products are not authorized for
use in such applications unless EXAR Corporation receives, in writting, assurances to its satisfaction that: (a) the risk of injury or damage has been
minimized ; (b) the user assumes all such risks; (c) potential liability of EXAR Corporation is adequately protected under the circumstances.
Copyright 2008 EXAR Corporation
Datasheet July 2008
Send your Interface technical inquiry with technical details to: [e-mail]
Reproduction, in part or whole, without the prior written consent of EXAR Corporation is prohibited.
Exar Corporation 48720 Kato Road, Fremont CA, 94538 • [phone] • www.exar.com

36
SP3508_100_072208