XR33152 Datasheet, PDF (2/19 Pages) Exar Corporation – TIA-485/TIA-422 Transceivers

XR33152/56/58
Absolute Maximum Ratings
These are stress ratings only and functional operation of the device at these ratings or any other above those indicated
in the operation sections to the specifications below is not implied. Exposure to absolute maximum rating conditions for
extended periods of time may affect reliability and cause permanent damage to the device.
V_CC
V_L
Input voltage at control and driver input (DE, DI and INV) XR33152/58
Receiver output voltage (RO) XR33152/58
Input voltage at control (RE) XR33156
Input voltage at control and driver input (DE, DI, R_INV, D_INV, and INV)
XR33156
Receiver output voltage (RO) XR33156
Driver output voltage (A, B, Y and Z)
-0.3V to 7.0V
V_L ≤ V_CC
-0.3V to (V_CC + 0.3V)
-0.3V to (V_CC + 0.3V)
-0.3V to (V_L + 0.3V)
-0.3V to 7.0V
-0.3V to (V_L + 0.3V)
±60V
Receiver input voltage (A and B, half or full duplex)
±60V
Transient voltage pulse, through 100Ω (Figure 7)
±100V
Driver output current
±250mA
Storage temperature range
-65°C to 150°C
Lead temperature (soldering, 10s)
300°C
Package power dissipation
8-pin NSOIC θ_JA = 128.4°C/W
14-pin NSOIC θ_JA = 86°C/W
Maximum junction temperature = 150°C
CAUTION:
ESD-sensitive (electrostatic discharge) device. Permanent damage may occur on unconnected devices subject to high energy electrostatic fields. Unused devices must be
stored in conductive foam or shunts. Personnel should be properly grounded prior to handling this device. The protective foam should be discharged to the destination socket
before devices are removed.
REV1A
2/19