XR3080-88X Datasheet, PDF (2/24 Pages) Exar Corporation – HIGH OUTPUT 18V TOLERANT RS-485/RS-422 +5V TRANSCEIVERS

XR3080-88X
HIGH OUTPUT 18V TOLERANT RS-485/RS-422 +5V TRANSCEIVERS
REV. 1.0.2
ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation of the device at these ratings or any other above those
indicated in the operation sections to the specifications below is not implied. Exposure to absolute maximum
rating conditions for extended periods of time may affect reliability and cause permanent damage to the
device.
V_CC
Input Voltage at Control and Driver Input (RE, DE, and DI)
Receiver Output Voltage (RO)
Driver Output Voltage (A, B, Y and Z)
Receiver Input Voltage (A and B, half or full duplex)
Transient Voltage Pulse, through 100
Figure 6
Driver Output Current
Storage Temperature Range
Lead Temperature (soldering, 10s)
Package Power Dissipation
8-Pin SO _JA = 128.4°C/W
14-Pin SO _JA = 86°C/W
-0.3V to +7.0V
-0.3V to +7.0V
-0.3V to (V_CC + 0.3V)
±18V
±18V
±70V
±250mA
-65°C to +150°C
+300°C
Maximum Junction Temperature = +150°C
CAUTION:
ESD (Electrostatic Discharge) sensitive device. Permanent damage may occur on unconnected devices
subject to high energy electrostatic fields. Unused devices must be stored in conductive foam or shunts.
Personnel should be properly grounded prior to handling this device. The protective foam should be
discharged to the destination socket before devices are removed.
2