XR-T5683A Datasheet, PDF (2/12 Pages) Exar Corporation – PCM Line Interface Chip

XR-T5683A
PIN CONFIGURATION
PDC 1
RXDATA+ 2
RXDATA- 3
TE 4
BIAS 5
TANK BIAS 6
RGND 7
RCLK 8
RV_CC 9
18 TV_CC
17 _TPOS
16 _TCLK
15 _TXDATA-
14 _TGND
13 _TXDATA+
12 TNEG
11 RPOS
10 _RNEG
18 Lead PDIP (0.300”)
PDC
RXDATA+
RXDATA-
TE
BIAS
TANK BIAS
RGND
RCLK
RV_CC
1
18
2
17
3
16
4
15
5
14
6
13
7
12
8
11
9
10
TV_CC
TPOS
TCLK
TXDATA-
TGND
TXDATA+
TNEG
RPOS
RNEG
18 Lead SOIC (JEDEC, 0.300”)
PIN DESCRIPTION
Pin #
1
2
3
4
5
6
7
Symbol
PDC
RXDATA+
RXDATA-
TE
BIAS
TANK BIAS
RGND
8
RCLK
9
RV_CC
10
RNEG
11
RPOS
12
TNEG
13 TXDATA+
14
TGND
15
TXDATA-
16
TCLK
17
TPOS
18
TV_CC
Type
I
I
O
O
O
O
O
O
I
O
O
I
I
Description
Peak Detector Capacitor. This pin should be connected to a 0.1µF capacitor.
Receive Analog Input Positive. Line analog input.
Receive Analog Input Negative. Line analog input.
Tank Excitation Output. This output connects to one side of the tank circuitry.
Bias. This output is to be connected to the center tap of the receive transformer.
Tank Bias. The tank circuitry is biased via this output.
Receiver Ground. To minimize ground interference a separate pin is used to ground the
receive section.
Recovered Receive Clock. Recovered clock signal to the terminal equipment.
Receive Supply Voltage. 5V supply voltage to the receive section.
Receive Negative Data. Negative pulse data output to the terminal equipment (active low).
Receive Positive Data. Positive pulse data output to the terminal equipment (active low).
Transmit Negative Data. TNEG is valid while TCLK is high.
Transmit Positive Output. Transmit bipolar signal is driven to the line via a transformer.
Transmit Ground.
Transmit Negative Output. Transmit bipolar signal is driven to the line via a transformer.
Transmit Clock. Timing element for TPOS and TNEG.
Transmit Positive Data. TPOS is valid while TCLK is high.
Transmit Supply Voltage. 5V supply voltage to the transmit section.
Rev. 2.01
2