English
Language : 

SP2525A Datasheet, PDF (2/10 Pages) Sipex Corporation – USB High-Side Power Switch
SP2525A
Single Channel USB Power Distribution Switch
ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation of
the device at these ratings or any other above those
indicated in the operation sections of the specifications
below is not implied. Exposure to absolute maximum
rating conditions for extended periods of time may affect
reliability.
Supply Voltage VIN ................................................. 7.0V
Fault Flag Voltage VFLG............................................ 7.0V
Fault Flag Current IFLG ...........................................50mA
Enable Input VEN......................................... -0.3V to 15V
Storage Temperature .............................. -65°C to 150°C
Power Dissipation (NSOIC-8) .........................................
(derate 6.14mW/°C above 70°C)...................... 500mW
OPERATING RATINGS
Ambient Temperature Range ..................... -40°C to 85°C
ELECTRICAL SPECIFICATIONS
Specifications with standard type are for an Operating Ambient Temperature of TA = 25°C only; limits applying over the full
Operating Junction Temperature range are denoted by a “•”. Minimum and Maximum limits are guaranteed through test,
design, or statistical correlation. Typical values represent the most likely parametric norm at TA = 25°C, and are provided
for reference purposes only. Unless otherwise indicated, VIN = 5.0V, TA= 25°C.
Parameter
Supply Current
Enable Input Voltage
Enable Input Current
Enable Input Capacitance
Output MOSFET Resistance
Output turn-on delay
Output turn-on rise time
Output turn-off delay
Output turn-off fall time
Output Leakage Current
Current limit threshold
Over temperature shutdown
threshold
Error Flag Output Resistance
Error Flag Current
UVLO threshold
Min.
0.8
0.6
Typ.
0.75
75
1.7
2.0
0.01
0.01
1
70
100
1000
0.8
0.7
1.0
135
125
10
15
0.01
2.6
2.4
Max.
5.0
100
2.4
1
1
100
4000
20
20
10
1.25
25
40
1
Units
µA
V
µA
pF
mΩ
µs
µs
µs
µs
µA
A
°C
Ω
µA
V
Conditions
VEN = Logic “0” OUT =open
VEN = Logic “1” OUT =open
VEN = Logic “0”
VEN = Logic “1”
VEN = Logic “0”
VEN = Logic “1”
RL=10Ω, each output
RL=10Ω, each output
RL=10Ω, each output
RL=10Ω, each output
Temperature TJ raising
Temperature TJ decreasing
VIN=5V, IL=10mA
VIN=3.3V, IL=10mA
VIN increasing
VIN decreasing
© 2011 Exar Corporation
2/10
Rev. 2.1.0