S7100PHC4 Datasheet, PDF (1/1 Pages) Exar Corporation – Halogen‐free Green

Material Declaration
Statement of Materials, Construction
Part Number: S7100PH‐C4
Package: 484L HSGBA (23x23mm)
Component
Name
Weight (g)
Material
Element/Compound
CAS No.
Weight (g)
Material Weight %
/Total Unit / Component
1
Die
2
Underfill
3
Epoxy
4 Heat Spreader
5
Solder ball
6
Substrate
7
PSR Ink
8
Build up
9
Bump
0.1502
0.0170
0.0500
2.3620
0.3983
0.6215
0.0319
0.1195
0.0239
Silicon
7440‐21‐3
Crystalline free silica
‐
Liquid epoxy resin compound of bisphenol Ｆ type _{9003‐36‐5}
Aminocompound
‐
Treated Aluminum oxide
‐
Others
‐
Cu
7440‐50‐8
NI (Metal)
7440‐02‐0
Tin(Sn)
7440‐31‐5
Silver(Ag)
7440‐22‐4
Copper(Cu)
7440‐50‐8
Copper Foil(Cu)
7440‐50‐8
Glass cloth
65997‐17‐3
Epoxy Resin including inorganic filler
‐
Solvent Naphtha(Petroleum),Heavy Arom _{64742‐94‐5}
Talc containing no asbestiform fibers
14807‐96‐6
Morpholine Derivative
‐
Barium Sulfate
7727‐43‐7
Dipropylene Glycol Monomethyl Ether
34590‐94‐8
Epoxy resin
‐
Dipropylene glycol
34590‐94‐8
N,N‐Dimethylformamide
68‐12‐02
Cyclohexanone
108‐94‐1
Bisphenol A epoxy resin
25068‐38‐6
Silica
7631‐86‐9
Coal tar naphtha
64742‐94‐5
Toluene
108‐88‐3
Others
‐
Tin(Sn)
7440‐31‐5
Silver(Ag)
7440‐22‐4
Copper (Cu)
7440‐50‐8
0.1502
0.0116
0.0039
0.0015
0.0438
0.0063
2.3485
0.0135
0.3844
0.0119
0.0020
0.2486
0.1865
0.1865
0.0035
0.0010
0.0010
0.0131
0.0054
0.0045
0.0035
0.0010
0.0016
0.0104
0.0394
0.0024
0.0002
0.0645
0.0231
0.0007
0.0001
3.98
0.31
0.10
0.04
1.16
0.17
62.22
0.36
10.18
0.32
0.05
6.59
4.94
4.94
0.09
0.03
0.03
0.35
0.14
0.12
0.09
0.03
0.04
0.28
1.05
0.06
0.01
1.71
0.61
0.02
0.00
100.00
68.00
23.00
9.00
87.50
12.50
99.43
0.57
96.50
3.00
0.50
40.00
30.00
30.00
11.00
3.00
3.00
41.00
17.00
14.00
11.00
0.80
1.30
8.70
33.00
2.00
0.20
54.00
96.50
3.00
0.50
Total Unit Weight:
3.77
Component weight is based on homogenous material used to assemble the unit. | Composition derived from the material declaration from vendors.
RoHS Certificate of Compliance
This package is fully RoHS compliant. The table above shows that this package meets the following RoHS requirements for EACH PACKAGE COMPONENT.
⊠ RoHS 2 (Recast) 2011/65/EU | Fully Compliant
⊠ ^{China RoHS | Fully Compliant}
EU RoHS Restricted Substance
Allowable Limit
(at homogenous material level)
⊠ ^{RoHS‐6 | Fully Compliant}
Cadmium & its compounds (Cd)
Hexavalent Chromium & its compounds (Cr(VI))
100 ppm (0.01 weight %)
1000 ppm (0.10 weight %)
Mercury & its compounds (HG)
1000 ppm (0.10 weight %)
⊠ ^{Non Use of PFOS & PFOA}
Polybrominated biphenyls (PBB)
1000 ppm (0.10 weight %)
⊠ ^{REACH | Fully Compliant}
Polybrominated diphenyl ethers (PBDE)
Lead & its compounds (Pb)
1000 ppm (0.10 weight %)
1000 ppm (0.10 weight %)
⊠ ^{Halogen‐free | Green}
⊠ Dodd‐Frank Wall Street Reform and Consumer Protection Act, July 21, 2010
We comply with this conflict metal free policy that restricts the use of those conflict metals, mining from the Democratic Republic of Congo (DRC) and it’s
adjoining countries. Exar will not accept product which uses these conflict metals from these areas. We require our suppliers to enforce this policy and be
able to identify and verify from their sources of minerals are conflict free. Suppliers are required to report if they or any supplier through their supply chain
use any of these conflict metals that are derived from certain conflict minerals originating in the DRC or an adjoining country. Exar Corporation is not aware
of any conflict metals to be used in any of their products.
⊠ Flammability rating of UL 94‐V0
⊠ MSL: L3 @ 260C
Chiew Mee Foo, QA Manager
Exar Corporation
48720 Kato Road, Fremont, CA 94538 Phone: 510‐668‐7000
www.exar.com
Reference No: MDS‐00000350 Rev 000