PEB1757AE Datasheet, PDF (1/2 Pages) Exar Corporation – TETHYS 2 STS-192/STM-64, 16 STS-48/STM-16, MUX/DEMUX

PEB1757E
TETHYS™ 2 STS-192/STM-64, 16 STS-48/STM-16, MUX/DEMUX
MARCH 2008
REV. 1.0.2
GENERAL DESCRIPTION
Tethys™ PEB1757E is optimized for SONET/SDH
applications as a full-duplex two STS-192/STM64 or
sixteen STS-48/STM-16 or a mix of sixteen STS-12/
STM-4 and STS-3/STM-1 MUX/DEMUX channel
device with full framer functionality including pointer
processing, and overhead termination; ideal for
aggregation, ADM and DWDM applications. In the
demultiplex ingress direction, Tethys™ PEB1757E
accepts either two STS-192/STM-64 or sixteen STS-
48/ STM-16, or a mix of sixteen STS-12/STM-4 and
STS-3/ STM-1 signals in serial 2.5 Gbit/s or serial 622
Mbit/s or serial 155 Mbit/s format. Tethys™
PEB1757E locates the incoming SONET/SDH frame,
optionally de-scrambles the data, monitors the TOH
and POH, and provides STS-1 level pointer
processing. In addition, Tethys™ PEB1757E supports
TOH and POH overhead transparency.
In the multiplex direction, Tethys™ PEB1757E
accepts sixteen STS-48/STM-16 signals in serial 2.5
Gbit/s format. Tethys™ PEB1757E further provides
corresponding functionality in the DEMUX direction.
APPLICATIONS
• ADM
• Metro Aggregation
• Digital Cross Connects
• Repeaters
• DWDM Equipment
• Test Equipment
FEATURES
• Provides 2 SFI4.1 interfaces for STS-192/STM-64 links
• Provides serial STS-48/STM-16, STS-12/STM-4 or STS-
3/STM-1 links
• Differential CML 2.5 Gbit/s I/O interface to optics
• Differential CML 2.5 Gbit/s I/O interface to system/
backplane
• TFI-5 Support
• Processes SONET/SDH sixteen STS-48/STM-16 or a
mix of sixteen STM-12/STM-4 and STS-3/STM-1 on the
line side interface
• Processes SONET/SDH sixteen STS-48/STM-16 on the
system/client side serial 2.5 Gbit/s interface
• Provides line timing of all line and system side interfaces
• Processes SONET/SDH flexible concatenation streams
of STS-2c, 3c, 4c, … to 192c
• Supports auto-detection of concatenation streams STS-
3c/STM-1, STS-12c/STM-4 and STS-48c/STM-16
• Supports STS-1 level pointer processing of STS-48/STM-
16 or STM-12/STM-4 or STS-3/STM-1 streams
• Provides interfaces for dropping alarm and status
information, and for forcing alarm conditions
• Power dissipation of 15 W, depending on mode of
operation
• Terminates and generates SONET section, line, and path
layers
• Provides TOH and POH transparency
• Provides monitoring of POH bytes B3 and N1/Z5
• Provides B2 SF/SD capability for Poisson and bursty
error distribution
• Provides full TOH/POH add/drop
• Provides STS-1 level POH add/drop
• Supports more than ± 746 UI programmable output skew
on STS48/STM-16 system side output links to external
cross-connects
• For diagnostic purposes, Tethys provides PRBS
generator/checker and loop backs
• Provides B1, B2, H1 and H2 bit error generation for both
receive and transmit direction diagnostics
• Provides 1 second performance monitors
• 0.13 micron process, 1.2 V core, 3.3 V I/O
• Motorola 32-bit synchronous microprocessor interface for
configuration, control, and status monitoring
• Complies with GR-253, GR-1377, ITU-T G.707, and
ANSI T1.105
• Provides a standard 5-signal IEEE 1149.1 JTAG test port
for boundary scan board test purposes
SPECIFICATIONS
• OIF TFI-5
STANDARDS
• ANSI T1.105-2000-193R2 (DRAFT)
• ANSI T1.105.05-1994
• T1X1.3/93-005RI -1993 - preliminary
• GR-253-CORE Sept. 2000
ORDERING INFORMATION
PART NUMBER
PEB1757E
PACKAGE
1397 CBGA
OPERATING TEMPERATURE RANGE
-40°C to +85°C
Exar Corporation 48720 Kato Road, Fremont CA, 94538 • [phone] • FAX [phone] • www.exar.com