|
CLC2011 Datasheet, PDF (1/17 Pages) Exar Corporation – Low Power, Low Cost, Rail-to-Rail I/O Amplifiers | |||
|
CLC2011, CLC4011
Low Power, Low Cost, Rail-to-Rail I/O Amplifiers
General Description
The CLC2011 (dual) and CLC4011 (quad) are ultra-low cost, low power,
voltage feedback amplifiers. At 2.7V, the CLCx011 family uses only 136μA
of supply current per amplifier and are designed to operate from a supply
range of 2.5V to 5.5V (±1.25 to ±2.75). The input voltage range exceeds the
negative and positive rails.
The CLCx011 family of amplifiers offer high bipolar performance at a low
CMOS prices. They offer superior dynamic performance with 4.9MHz small
signal bandwidths and 5.3V/μs slew rates. The combination of low power,
high bandwidth, and rail-to-rail performance make the CLCx011 amplifiers
well suited for battery-powered communication/computing systems.
F E AT U R E S
â â 136μA supply current
â â 4.9MHz bandwidth
â â Output swings to within 20mV of either rail
â â Input voltage range exceeds the rail by
>250mV
â â 5.3V/μs slew rate
â â 21nV/âHz input voltage noise
â â ±35mA linear output current
â â Fully specified at 2.7V and 5V supplies
A P P L I C AT I O N S
â â Portable/battery-powered applications
â â Mobile communications, cell phones,
pagers
â â ADC buffer
â â Active filters
â â Portable test instruments
â â Notebooks and PDAâs
â â Signal conditioning
â â Medical equipment
â â Portable medical instrumentation
Ordering Information - back page
Large Signal Frequency Response
Vs = 5V
Vo = 1Vpp
Vo = 4Vpp
Vo = 2Vpp
0.01
0.1
1
10
Frequency (MHz)
Output Swing vs. Load
1.35
R L = 10kâ¦
R L = 1kâ¦
R L = 75â¦
0
R L = 100â¦
R L = 200â¦
R L = 75/100â¦
-1.35
-2.0
0
2.0
Input Voltage (0.4V/div)
© 2009 - 2014 Exar Corporation
1 / 17
exar.com/CLC2011
Rev 1D
|
▷ |