CLC1005 Datasheet, PDF (1/19 Pages) Exar Corporation – Low Cost, +2.7V to 5.5V, 260MHz Rail-to-Rail Amplifiers

CLC1005, CLC1015, CLC2005
Low Cost, +2.7V to 5.5V, 260MHz
Rail-to-Rail Amplifiers
General Description
The CLC1005 (single), CLC1015 (single with disable), and CLC2005 (dual)
are low cost, voltage feedback amplifiers. These amplifiers are designed
to operate on +2.7V to +5V, or ±2.5V supplies. The input voltage range
extends 300mV below the negative rail and 1.2V below the positive rail.
The CLC1005, CLC1015, and CLC2005 offer superior dynamic performance
with 260MHz small signal bandwidth and 145V/μs slew rate. The amplifiers
consume only 4.2mA of supply current per channel and the CLC1015 offers
a disable supply current of only 127μA. The combination of low power, high
output current drive, and rail-to-rail performance make these amplifiers well
suited for battery-powered communication/computing systems.
The combination of low cost and high performance make the CLC1005,
CLC1015, and CLC2005 suitable for high volume applications in both
consumer and industrial applications such as interactive whiteboards,
wireless phones, scanners, color copiers, and video transmission.
F E AT U R E S
■■ 260MHz bandwidth
■■ Fully specified at +2.7V and +5V supplies
■■ Output voltage range:
❏❏ 0.036V to 4.953V; V_S = +5; R_L = 2kΩ
■■ Input voltage range:
❏❏ -0.3V to +3.8V; V_S = +5
■■ 145V/μs slew rate
■■ 4.2mA supply current
■■ Power down to 127μA
■■ ±55mA linear output current
■■ ±85mA short circuit current
■■ CLC2005 directly replaces AD8052/42/92
in single supply applications
■■ CLC1005 directly replaces AD8051/41/91
in single supply applications
A P P L I C AT I O N S
■■ A/D driver
■■ Active filters
■■ CCD imaging systems
■■ CD/DVD ROM
■■ Coaxial cable drivers
■■ High capacitive load driver
■■ Portable/battery-powered applications
■■ Twisted pair driver
■■ Telecom and optical terminals
■■ Video driver
■■ Interactive whiteboards
Ordering Information - backpage
Output Swing
2.7
V_s = +2.7V
R_L = 2kΩ
G = -1
0
Time (0.5μs/div)
© 2007-2015 Exar Corporation
2nd & 3rd Harmonic Distortion; V_S = +2.7V
-20
V_o = 1V_pp
-30 ^{Rf = 1kΩ}
3rd
-40
R_L = 150Ω
-50
-60
2nd
R_L = 150Ω
-70
2nd
R_L = 2kΩ
-80
-90
0
3rd
R_L = 2kΩ
5
10
15
20
Frequency (MHz)
1 / 19
exar.com/CLC1005
Rev 2D