CLC1003 Datasheet, PDF (1/17 Pages) Cadeka Microcircuits LLC. – Low Distortion, Low Offset, RRIO Amplifier

CLC1003
Low Distortion, Low Offset, RRIO Amplifier
General Description
The CLC1003 is a single channel, high-performance, voltage feedback
amplifier with near precision performance, low input voltage noise, and
ultra low distortion. The CLC1003 offers 1mV maximum input offset voltage,
3.5nV/√Hz broadband input voltage noise, and 0.00005% THD at 1kHz.
These amplifiers also provide 55MHz gain bandwidth product and 12V/μs
slew rate making them well suited for applications requiring precision DC
performance and high AC performance. This high-performance amplifier
also offers a rail-to-rail input and output, simplifying single supply designs
and offering larger dynamic range possibilities. The inputs extend beyond
the rails by 500mV.
The CLC1003 is designed to operate from 2.5V to 12V supplies and
operate over the extended temperature range of -40°C to +125°.
F E AT U R E S
■■ 1mV maximum input offset voltage
■■ 0.00005% THD at 1kHz
■■ 5.3nV/√Hz input voltage noise > 10kHz
■■ -90dB/-85dB HD2/HD3 at 100kHz, R_L = 100Ω
■■ <-100dB HD2 and HD3 at 10kHz, R_L = 1kΩ
■■ Rail-to-rail input and output
■■ 55MHz unity gain bandwidth
■■ 12V/μs slew rate
■■ +80mA, -55mA output current
■■ -40°C to +125°C operating temperature
range
■■ Fully specified at 3 and ±5V supplies
■■ CLC1003: ROHS compliant TSOT-5,
SOIC-8 package options
A P P L I C AT I O N S
■■ Active filters
■■ Sensor interface
■■ HIgh-speed transducer amp
■■ Medical instrumentation
■■ Probe equipment
■■ Test equipment
■■ Smoke detectors
■■ Hand-held analytic instruments
■■ Current sense applications
Ordering Information - back page
Typical Application
SPM
(Smart
Power
Module)
VCC
M
+
CLC1003
–
lph_1
lph_2
lph_3
Current Sensing in 3-Phase Motor
THD vs. Frequency
-65
-70
-75
-80
-85
-90
-95
-100
V_OUT = 1V_pp
RL = 1K
AV+1
100 200 300 400 500 600 700 800 900 1000
Frequency (kHz)
© 2007-2014 Exar Corporation
1 / 17
exar.com/CLC1003
Rev 1D