30-01-A5C-ASUC-AM Datasheet, PDF (9/10 Pages) Everlight Electronics Co., Ltd – Technical Data Sheet 3mm POWER LED

Technical Data Sheet
3mm POWER LED
30-01/A5C-ASUC/AM
6. Heat Management
Heat management of LEDs must be taken into consideration during the design stage of
LED application. The current should be de-rated appropriately by referring to the de-rating
curve found in each product specification.
The temperature surrounding the LED in the application should be controlled. Please refer
to the data sheet de-rating curve.
7. ESD (Electrostatic Discharge)
Electrostatic discharge (ESD) or surge current (EOS) can damage LEDs.
An ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling
LEDs.
All devices, equipment and machinery must be properly grounded.
Use ion blower to neutralize the static charge which might have built up on surface of the
LEDs plastic lens as a result of friction between LEDs during storage and handing.
8. Other
Above specification may be changed without notice. EVERLIGHT will reserve authority
on material change for above specification.
When using this product, please observe the absolute maximum ratings and the instructions
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for
any damage resulting from use of the product which does not comply with the absolute
maximum ratings and the instructions included in these specification sheets.
Everlight Electronics Co., Ltd.
Device number: DPE-0000041
http://www.everlight.com Rev. 1 Page: 9 of 10
Established date: 02-18-2009 Established by: Ken Lee