CLS15-22C-L213B-TR8_15 Datasheet, PDF (8/11 Pages) Everlight Electronics Co., Ltd – RGB Color Light Sensor

DATASHEET
Ambient Light Sensor
Surface – Mount
CLS15-22C/L213R/TR8
CLS15-22C/L213G/TR8
CLS15-22C/L213B/TR8
Soldering Iron
℃ Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than
the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be
careful because the damage of the product is often started at the time of the hand solder.
Repairing
Repair should not be done after the device have been soldered. When repairing is unavoidable, a double-head
soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the
device will or will not be damaged by repairing.
8
Copyright © 2012, Everlight All Rights Reserved. Release Date : 6.4.2013. Issue No: DLS-0000056 Rev.1
www.everlight.com