ALS-PDIC17-77C-TR8_15 Datasheet, PDF (8/12 Pages) Everlight Electronics Co., Ltd – Ambient Light Sensor

DATASHEET
Ambient Light Sensor - Surface Mount
ALS-PDIC17-77C/TR8
Recommended method of storage
1. Do not open moisture proof bag before devices are ready to use.
2. Shelf life in sealed bag from the bag seal date:
18 months at 10°C~30°C and < 90% RH.
3. After opening the package, the devices must be stored at 10°C~30°C and  60%RH, and used within 1 year
(floor life).
4. If the moisture absorbent material (desiccant material) has faded or unopened bag has exceeded the shelf
life or devices (out of bag) have exceeded the floor life, baking treatment is required.
5. If baking is required, refer to IPC/JEDEC J-STD-033 for bake procedure or recommend the following
conditions:
192 hours at 40°C +5/–0°C and < 5 % RH (reeled/tubed/loose units) or
96 hours at 60°C ± 5°C and < 5 % RH (reeled/tubed/loose units) or
24 hours at 125°C ± 5°C, not suitable for reel or tubes.
Recommended Solder Profile
Notice:
(1) Reflow soldering should not be done more than two times.
(2) When soldering, do not put stress on the devices during heating.
(3) After soldering, do not warp the circuit board.
Revi8sion _Copy:_rig6_{ht © 2014, Everlight All Rights Reserved. Release Date : 03.10.2014. Issue No}R_{: D}e_Ll_Se_-a₀s₀₀e₀₀D₂₅ate_R:_e2_v.0₆14-03-1_w3_w1_w3_.:_e2_v1_e:_r2_li1_g._h0_t.com
LifecyclePhase:
Expired Period: Forever