ALS-PDIC17-55C-TR8_15 Datasheet, PDF (8/12 Pages) Everlight Electronics Co., Ltd – Ambient Light Sensor

DATASHEET
Ambient Light Sensor
Surface - Mount
ALS-PDIC17-55C/TR8
Recommended method of storage
Reflow Terms: JEDEC Level 3 Specification
Dry box storage is recommended as soon as the aluminum bag has been opened prevent
moisture absorption. The following conditions should be observed, if dry boxes are not available:
 Storage temperature 10Ċ to 30Ċ
 Storage humidity Ù60%RH max
After more than 168 hours under these conditions moisture content will be too high for
reflow soldering. In case of moisture absorption, the devices will recover to former condition by drying under the
following condition:
192 hours at 40Ċ+5Ċ/-0Ċ and 5%RH (dry air / nitrogen), or
96 hours at 60Ċ+5Ċ and < 5%RH for all device containers, or
24 hours at 125Ċ+5Ċ not suitable for reel or tubes
ESD Precaution:
Proper storage and handing procedures should be followed to prevent ESD damage to
the devices especially when they are removed from the Anti-static bag. Electro-Static Sensitive Devices warning
labels are on the packing.
Recommended Solder Profile
Notice:
(1) Reflow soldering should not be done more than two times.
(2) When soldering, do not put stress on the devices during heating.
(3) After soldering, do not warp the circuit board.
Revi8sion _Copy:_rig4_{ht © 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No:}R_De_LSle_-0a₀s₀₀e₀₁D₂at_Re_e:_v2_.4013-06-0_w4_w0_w8_.:_e0_v6_e:_r1_li9_g._h0_t.com
LifecyclePhase:
Expired Period: Forever