SIR67-21C-TR8 Datasheet, PDF (7/9 Pages) Everlight Electronics Co., Ltd – Top Infrared LED

DATASHEET
SIR67-21C/TR8
4. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350Ċ for 3 seconds within
once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering
of each terminal. Be careful because the damage of the product is often started at the time of the hand
solder.
5. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the
characteristics of the LEDs will or will not be damaged by repairing.
Revi7sion _Copy:_rig1_{ht © 2010, Everlight All Rights Reserved. Release Date : MAY.20.2013. Issue} R_Noe_: l_De_IRa_-s₀e₀₀D₀₉a₅₇te:2013-06-0_w3_w1_w5_.:_e2_v2_e:_r4_li9_g._h0_t.com
LifecyclePhase:
Expired Period: Forever