ALS-PT19-315C Datasheet, PDF (7/11 Pages) Everlight Electronics Co., Ltd – Surface - Mount Ambient Light Sensor

Surface - Mount
Ambient Light Sensor
ALS-PT19-315C/L177/TR8
Recommended method of storage
Reflow Terms: JEDEC Level 4 Specification
Dry box storage is recommended as soon as the aluminum bag has been opened prevent
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift might cause
big current happen. (Burned-out might happen).
2. Storage
(1) Do not open moisture proof bag before components are ready to use.
℃ (2) Before opening moisture proof bag, components should be kept at 30 or less and
90%RH or less.
(3) Components should be used within a year.
℃ (4) After opened moisture proof bag, components should be kept at 30 or less and
70%RH or less.
(5) Components should be used within 168 hours after opened moisture proof bag.
(6) If the moisture absorbent material (silica gel) has faded away or the components
have exceeded the storage time, baking treatment should be performed using the
℃ following conditions. (Baking treatment: 60±5 for 24 hours)
ESD Precaution:
Proper storage and handing procedures should be followed to prevent ESD damage to
the devices especially when they are removed from the Anti-static bag. Electro-Static
Sensitive Devices warning labels are on the packing.
Everlight Electronics Co., Ltd.
Document No: DAS-019-002 Rev2.0
7
http:\\www.everlight.com
Jan. 25, 2008