ELSS-406SYGWA Datasheet, PDF (5/8 Pages) Everlight Electronics Co., Ltd – 0.39 Single Digit SMD Displays

■ Reflow Temp. / Time :
ELSS-406SYGWA/S530-E2
■ Soldering Iron :
Basic spec is ≦5 sec when 260℃.If temperature is higher, time should be shorter (+10℃
→ -1sec). Power dissipation of iron should be smaller than 15 W , and temperature should
be controllable. Surface temperature of the device should be under 230 ℃.
■ Rework :
1. Customer must finish rework within 5 sec under 260℃.
2. The head of iron can not touch copper foil.
Everlight Electronics Co., Ltd.
Device No:CDGS-406-010
http://www.everlight.com
Prepared date: 2006/5/7
Rev. 2
Page 5 of 8
Prepared by: hong zhou