ALS-PDIC17-79NB-TR8_15 Datasheet, PDF (18/19 Pages) Everlight Electronics Co., Ltd – Digital Ambient Light Sensor

DATASHEET
SMD  I²C Digital Ambient Light Sensor
ALS-PDIC17-79NB/TR8
Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350Ċ for 3 seconds within once in less
than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be
careful because the damage of the product is often started at the time of the hand solder.
Repairing
Repair should not be done after the device have been soldered. When repairing is unavoidable, a double-head
soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the
device will or will not be damaged by repairing.
Revi1si8on _Copy:_rig3_{ht © 2010, Everlight All Rights Reserved. Release Date : 3.5.2012. Issue No: D}R_LSe_-l₀e₀a₀₀s₀e₃₄Date:2012-03-1_w6_w1_w2_.:_e0_v0_e:_r3_li3_g._h0_t.com
LifecyclePhase:
Expired Period: Forever