45-21S-KK2C-H4040L9N3B2Z6 Datasheet, PDF (18/28 Pages) Everlight Electronics Co., Ltd – Low Power LED

DATASHEET
SMD  Low Power LED
45-21S/XK2C-HXXXXXXXXB2Z6/2T
4. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350Ċ for 3 seconds within once in less
than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be
careful because the damage of the product is often started at the time of the hand solder.
5. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head
soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of
the LEDs will or will not be damaged by repairing.
Revi1si8on Copy:rig3ht © 2013, Everlight All Rights Reserved. Release Date : 09.Sep.2013. Issue NRo:eVl3ease Date:2013-09-1w7w1w0.:e5v6e:r4li5g.h0t.com
Issue No:DSE-0009269
LifecyclePhase:
Expired Period: Forever