ALS-PDIC17-79NB-TR8 Datasheet, PDF (17/21 Pages) Everlight Electronics Co., Ltd – I2 Digital Ambient Light Sensor

Surface - Mount
I²C Digital Ambient Light Sensor
ALS-PDIC17-79NB/TR8
Recommended method of storage
1. Do not open moisture proof bag before devices are ready to use.
2. Shelf life in sealed bag from the bag seal date:
18 months at 10°C~30°C and < 90% RH.
3. After opening the package, the devices must be stored at 10°C~30°C and ≤ 60%RH, and
used within 168 hours (floor life).
4. If the moisture absorbent material (desiccant material) has faded or unopened bag has
exceeded the shelf life or devices (out of bag) have exceeded the floor life, baking
treatment is required.
5. If baking is required, refer to IPC/JEDEC J-STD-033 for bake procedure or recommend
the following conditions:
192 hours at 40°C +5/–0°C and < 5 % RH (reeled/tubed/loose units) or
96 hours at 60°C ± 5°C and < 5 % RH (reeled/tubed/loose units) or
24 hours at 125°C ± 5°C, not suitable for reel or tubes.
Recommended Solder Profile
Notice:
(1) Reflow soldering should not be done more than two times.
(2) When soldering, do not put stress on the devices during heating.
(3) After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Document No: DLS-xxxxxxx Rev1
17
http://www.everlight.com
Oct. 12, 2010