45-21UFC Datasheet, PDF (14/14 Pages) Everlight Electronics Co., Ltd – Top View LEDs

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet - Preliminary
Top View LEDs
45-21UFC/XXXXXXX/TR8
5. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand
whether the characteristics of the LEDs will or will not be damaged by repairing.
6. Handling Indications
During processing, mechanical stress on the surface should be minimized as much as possible. Sharp
objects of all types should not be used to pierce the sealing compound
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: [phone]
Fax: [phone]
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Prepared date: 29-Oct-2007
Rev. 1.1 Page: 14 of 14
Prepared by: Ya-Hui Fang