22-23-R6GHBHC-A01-2C Datasheet, PDF (12/12 Pages) Everlight Electronics Co., Ltd – Full Color Chip LED (Chip LED with Right Angle Lens)

EVERLIGHT ELECTRONICS CO.,LTD.
22-23/R6GHBHC-A01/2C
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350Ċ for 3 seconds within
once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of the
hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: [phone]
Fax: [phone],
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. : DSE-0002063
Revision : 3
LifecyclePhase:
http://www.everlight.com
Rev. 3
Page: 12 of 12
Prepared date: 17-Aug-2009
Prepared by: Ashley Kuo
Release Date:2009-08-19 11:07:06.0
Expired Period: Forever