12-23C-R6GHBHC-A01-2C_08 Datasheet, PDF (12/12 Pages) Everlight Electronics Co., Ltd – Full Color Chip LED (Chip LED with Right Angle Lens)

EVERLIGHT ELECTRONICS CO.,LTD.
12-23C/R6GHBHC-A01/2C
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350Ċ for 3 seconds within
once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering
of each terminal. Be careful because the damage of the product is often started at the time of the hand
solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: [phone]
Fax: [phone]
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. : DSE-123-009
Revision : 2
LifecyclePhase:
http://www.everlight.com
Rev. 2
Page: 12 of 12
Prepared date:09-Jul-2008
Prepared by :Yuan Shaoxiang
Release Date:2008-09-20 00:15:54.0
Expired Period: Forever