Y2C-FN1P1VZ Datasheet, PDF (10/10 Pages) Everlight Electronics Co., Ltd – Chip LED (0.6mm Height)

EVERLIGHT ELECTRONICS CO.,LTD.
19-213/Y2C-FN1P1VZ/DT
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: [phone]
Fax: [phone]
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. :SZDSE-193-Y15
http://www.everlight.com
Prepared date:16-Mar-2006
Rev.1
Page: 10 of 10
Prepared by: Xiaoyan