91-21UBC Datasheet, PDF (10/10 Pages) Everlight Electronics Co., Ltd – 1.9mm Round Subminiature Lead LEDs

EVERLIGHT ELECTRONICS CO.,LTD.
91-21UBC/C430/XXX
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: [phone]
Fax: [phone]
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. : DLE-912-325
http://www.everlight.com
Prepared date: 07-29-2005
Rev. 2.1
Page: 10 of 10
Prepared by: Forrest Chen