204-15-T2C3-4LQA Datasheet, PDF (10/11 Pages) Everlight Electronics Co., Ltd – 3 mm Round White LED (T-1)

DATASHEET
LAMP
204-15/T2C3-4LQA
6. Heat Management
Heat management of LEDs must be taken into consideration during the design stage of LED application. The
current should be de-rated appropriately by referring to the de-rating curve found in each product
specification.
The temperature surrounding the LED in the application should be controlled. Please refer to the data sheet
de-rating curve.
7. ESD (Electrostatic Discharge)
The products are sensitive to static electricity or surge voltage. ESD can damage a die and its reliability.
When handling the products, the following measures against electrostatic discharge are strongly
recommended:
Eliminating the charge
Grounded wrist strap, ESD footwear, clothes, and floors
Grounded workstation equipment and tools
ESD table/shelf mat made of conductive materials
Proper grounding is required for all devices, equipment, and machinery used in product assembly.
Surge protection should be considered when designing of commercial products.
If tools or equipment contain insulating materials such as glass or plastic,
the following measures against electrostatic discharge are strongly recommended:
Dissipating static charge with conductive materials
Preventing charge generation with moisture
Neutralizing the charge with ionizers
10 _{Copyright © 2010, Everlight All Rights Reserved. Release Date : May. 03, 2013. Issue No: DLE-0001234_Rev.4}
www.everlight.com