|
EL817_07 Datasheet, PDF (1/12 Pages) Everlight Electronics Co., Ltd – Photocoupler-RoHS Compliant | |||
|
EVERLIGHT ELETCRONICS CO., LTD
Technical Data Sheet
Photocoupler-RoHS Compliant
Features:
⢠Current transfer ratio
(CTR:MIN.50% at IF =5mA ,VCE =5V)
⢠High isolation voltage between input
and output (Viso=5000 V rms )
⢠Compact dual-in-line package
EL817*:1-channel type
⢠Pb free
⢠UL approved (No. E214129)
⢠VDE approved (No. 132249)
⢠SEMKO approved (No. 608400)
⢠NEMKO approved (No. PO6206474/A1)
⢠DEMKO approved (No. 313924-01)
⢠FIMKO approved (No. FI 22807)
⢠CSA approved (No. 1143601)
⢠BSI approved (No. 8592, 8593)
⢠Options available:
- Leads with 0.4â(10.16mm) spacing (M Type)
- Leads bends for surface mounting (S and S1 Type)
- Tape and Reel of Typeâ
for SMD(AddâTAâ Suffix)
- Tape and Reel of Typeâ
¡ for SMD(AddâTBâ Suffix)
- The tape is 16mm and is wound on a 33cm reel
⢠The product itself will remain within RoHS compliant version.
EL817 Series
EL817
EL817M
EL817S
Description
The EL817 series contains a infrared emitting diode optically coupled to a phototransistor. It is
packaged in a 4-pin DIP package and available in wide-lead spacing and SMD option.
Applications
⢠Computer terminals
⢠System appliances, measuring instruments
⢠Registers, copiers, automatic vending machines
⢠Signal transmission between circuits of different potentials and impedances
Device Selection Guide
Part. No.
Chip Material
IR
PT
EL817*
GaAs
Silicon
Everlight Electronics Co., Ltd.
Device Noï¼DPC-817-001
http:\\www.everlight.com
Prepared dateï¼08-01-2007
Rev 7
Page: 1 of 12
Prepared byï¼Che-Lun Yu
|
▷ |