EUP7998 Datasheet, PDF (1/2 Pages) Eutech Microelectronics Inc – Sink/Source DDR Termination Regulator

EUP7998
Sink/Source DDR Termination Regulator
DESCRIPTION
The EUP7998 is a high performance linear regulator
designed to provide power for termination of a DDR
memory bus. It significantly reduces parts count,
board space and overall system cost over previous
switching solutions.
The EUP7998 maintains a fast transient response
using only 20μF or 30μF output capacitance. The
EUP7998 supports a remote sensing function and all
power requirements for DDR, DDR2, DDR3 and
Low Power DDR3/DDR4 VTT bus termination.
The EUP7998 provides current and thermal limits to
prevent damage to the linear regulator. Additionally,
The EUP7998 generates an open-drain PGOOD
signal to monitor the output regulation. An active
high enable pin EN can pull VTT low, but REFOUT
will remain active. A power savings advantage can be
obtained in this mode through lower quiescent
current.
The EUP7998 is available in the 3mm × 3mm
TDFN-10 and SOP-8 (EP) packages.
FEATURES
z VLDOIN Input Voltage Range: 1.1V to 3.5V
z VIN Input Voltage Range: 2.375V to 5.5V
z Typically 3× 10μF MLCCs stable for DDR
z Fast Load-Transient Response
z ±10mA Buffered Reference (REFOUT)
z Meet DDR, DDR2 JEDEC Specifications.
Supports DDR3 and Low-Power DDR3/DDR4
VTT Applications
z Power-Good Window Comparator
z With Soft Start, UVLO and OCP
z Thermal Shutdown
z Available in 10-Pin 3mm× 3mm TDFN and
SOP-8 (EP) packages
z RoHS Compliant and 100% Lead(Pb)-Free
Halogen-Free
APPLICATIONS
z Notebook/Desktop/Server
z DDR Memory Termination
z Telecom/Datacom, GSM Base Station,
LCD-TV/PDP-TV, Copier/Printer, Set-Top Box
Typical Application Circuit
DS7998 Ver1.1 Aug. 2010
Figure 1. For TDFN-10 package
1