EQXO1000BM Datasheet, PDF (2/2 Pages) EUROQUARTZ limited – 14 pin Dual-in-Line MIL SPECIFICATION

EURO QUARTZ EQXO-1000BM and 3000BM OSCILLATORS
14 pin Dual-in-Line MIL SPECIFICATION
30kHz to 70MHz
Page 2 of 2
STANDARD FREQUENCIES & SPECIFICATIONS
(EQXO-1000BM series parts)
Stock Number Frequency
Specification
OK00032A
OK00080A
OK00100A
OK00307A
OK00500A
OK01000A
OK01228A
OK03686A
OK04915A
OK06000A
OK06400A
OK08000A
OK09216A
OK10000A
OK12000A
OK14745A
OK15375A
OK16000A
OK18000A
OK20000A
OK24000A
OM025A00
OM030A00
OM032A00
OM033A33
OM040A00
OM050Z00
OM064Z00
32.7680kHz
80.0000kHz
100.000kHz
307.200kHz
500.000kHz
1.00000MHz
1.22880MHz
3.68640MHz
4.91520MHz
6.00000MHz
6.40000MHz
8.00000MHz
9.21600MHz
10.0000MHz
12.0000MHz
14.7456MHz
15.3750MHz
16.0000MHz
18.0000MHz
20.0000MHz
24.0000MHz
25.0000MHz
30.0000MHz
32.0000MHz
33.3330MHz
40.0000MHz
50.0000MHz
64.0000MHz
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
±100ppm -55~+125°C
QUALIFICATION APPROVAL &
ENVIRONMENTAL SPECIFICATION
Vibration:
10Hz to 60Hz, 0.75mm displacement,
60Hz to 2000Hz, 98.1m/s² acceleration
30 minutes in each of three mutually-
perpendicular planes.
Shock:
981 m/s² for 6ms, three shocks in each
direction along three mutually-
perpendicular planes.
Thermal Shock:
MIL-STD-202 Method 107
Storage Temperature:
-55°C for 24 hrs., then +150°C, 24 hrs.
Moisture Resistance:
85% Relative Humidity at 85°C for 24hrs.
Seal:
Fine leak not to exceed 1x10^-8mB litres
of helium leakage, then Gross Leak Test.
Terminal Strength: MIL-STD-202 Method 211
Solerability:
MIL-STD-202 Method 208
SCREENING
Screening in accordance with MIL-O-55310C Class B.
All devices are 100% tested to the following conditions:
Stabilization Bake: Vacuum storage at 150°C for 24 hrs.
Temperature Cycling:
-55°C to +125°C, 10 cycles
Constant Acceleration:
49000m/s² for 1 minute inY1 plane.
Seal:
Fine leak not to exceed 1x10^-8mB litres
of helium leakage, then Gross Leak Test.
Dynamic Burn-in:
125°C for 168hrs.
Electrical Test:
Frequency, output waveform, output
Voltage/power, input current/power.
RADIATION TOLERANT VERSIONS
Radiation tolerant versions of EQXO-1000BM series oscillators have
been designed and are manufactured to ensure no functional failures
will occur in any electrical test for a total radiation dose of 40krad(Si).
EQXO-1000BM series oscillators so manufactured have the letter 'H'
appended to the 'BM' in the part number suffix:
20.000MHz EQXO-1100BMH
A paper is available describing the general problems encountered in
the design of electrical systems needing to withstand radiation
encountered in the upper atmosphere and space.
PART NUMBER GENERATION
Frequency / Model Number / Plating* / Screening (if required)
Example: 10.000MHz EQXO-1100BMH Screened
*Note: Lead and base plating is gold flashed over nickel as standard.
If nickel plating only is required enter / - nickel / in this position.
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: [phone] Fax: [phone] [e-mail] www.euroquartz.co.uk