XOVN-9000B Datasheet, PDF (1/1 Pages) EUROQUARTZ limited – High Stability SMD VCXO

EURO QUARTZ
High Stability SMD VCXO
High stability VCXO, ±0.1ppm over -10° to +70°C
Suitable for base stations (Femtocell) requiring high stability
Output HCMOS or clipped sine wave available
Exceptionally good value for close-to OCXO performance
Low power use, 4mA for HCMOS, 2.4mA max for clipped sine
Lower phase noise available by external capacitor
DESCRIPTION
XOVN-9000B series VCXOs are ceramic SMD VCXOs packaged in an
the industry-standard, ultra-miniature 3.2 x 2.5mm package. This
VCXO exhibits exceptionally high frequency stability performance and
provides cost-effective high performance, comparable to OCXO.
VCXO - XOVN-9000B Series
10.0MHz to 52.0MHz
XOVN-9000B - OUTLINES AND DIMENSIONS
SPECIFICATION
Product Series Code:
Frequency Range:
Output Waveform:
Operating Conditions
Operating Temperature:
Storage Temperture:
Input Voltage:
Frequency Tolerance:
Temperature Stability:
Voltage Coefficient:
Load Coefficient:
Ageing:
Output Load
HCMOS output:
Clipped Sine Wave output:
Output Level
Clipped sine wave:
HCMOS:
Symmetry:
Rise and fall times:
Input current
HCMOS:
Clipped Sine Wave:
Frequency Controlled Range:
Standard Frequencies:
XOVN-9000B
10.0MHz to 52.0MHz
HCMOS (code CM)
Clipped Sine Wave (code CS)
-40° to +85°C
-40° to +85°C
+2.7V to+5.5VDC
±1.5ppm max.
(at 25°C ambient, after reflow)
±0.1ppm over -10° to +50°C
±0.4ppm over -40° to +85°C
±0.05ppm max. at VDD±5%
±0.05ppm max. Load ±10%
±0.5ppm max. at 25°C ±3°C for
first year
15pF maximum
10kΩ//10pF
0.8Vp-p min.
'0' Level: Vol: 10% Vdd max.
'1' Level: Voh: 90% Vdd min.
45/55%
5ns max.
4.0mA max. (no load)
2.4mA max.
fo = 19.2MHz, Vdd = 3.3V
±3ppm to ±15ppm
Vcon=+1.5V±1.0V
Positive slope
10.0, 12.8, 13.0, 16.0, 19.2,
20.0, 24.576, 25.0, 26.0, 27.0,
40.0 and 50.0MHz.
PHASE NOISE CHARATERISTICS
An additional external capacitor (0.033µF) connected
between terminals 7 and 4 (Gnd) provides lower phase
noise characteristics.
PART NUMBERING PROCEDURE
Example: XOVN-9000B-CS-3.3V-KK2-gii-EF-14.7456M
Code
Output
Waveform
CS
Clipped
Sine Wave
CM
HCMOS
Input Voltage
3.0V to 5.0V±10%
Code
Temperature
Stability
KK2
LL2
MM2
PP2
QQ2
RR2
SS2
±0.1ppm
±0.15ppm
±0.2ppm
±0.25ppm
±0.3ppm
±0.35ppm
±0.4ppm
Operating Frequency
10.0 to 52.0MHz
Code
Vc Filter
Option
EF
Non
With external
filter
Without external
filter
Code
Temperature
Range °C
Stability
gee -10 to +50
ggg -10 to +60
gii -10 to +70
gjj -10 to +75
iii -20 to +70
ljj -20 to +75
kii -30 to +75
kkk -30 to +80
kll -30 to +85
lkk -35 to +80
mll -40 to +85
KK2
or
LL2
MM2
PP2
QQ2
RR2
or
SS2
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: [phone] Fax: [phone] [e-mail] www.euroquartz.co.uk