XOPL91 Datasheet, PDF (1/1 Pages) EUROQUARTZ limited – FACTORY PROGRAMMED OSCILLATORS

FACTORY PROGRAMMED OSCILLATORS
XOPL91 SERIES
Low Jitter 7mm x 5mm SMD
Programmable Oscillators
DESCRIPTION
The Euroquartz range of factory programmable oscillators provide custom
frequency and specification oscillators within very short lead times. The
parts are very reliable in use and have stabilities from ±25ppm over -40°
to 85°C. In addition to the stability over operating temperature range
customers may also choose from supply voltages of 2.7, 3.3 and 5.0
Volts, Enable/Disable or Power Down functions and output synchronous
or asynchronous .
OUTLINE & DIMENSIONS
FEATURES
· Very quick delivery available
· Industry-standard 7mm x 5mm SMD package
· Frequency range 1MHz to 133MHz
· Ultra low jitter @ 1 million samples
· Supply Voltages 2.7 Volts, 3.3 Volts or 5.0 Volts
· Enable/Disable or Power Down options
GENERAL SPECIFICATION
Package Type:
SMD, ceramic, seam-welded lid
OPERATING LOAD CONDITIONS
Frequency Range
Maximum Capacitive Load TTL
5.0 Volt Supply:
1.0MHz to 133.0MHz
5.0 Volt Supply
3.3 Volt Supply:
1.0MHz to 100.0MHz
1.0MHz ~ 40MHz:
50pF
2.7 Volt Supply:
1.0MHz to 100.0MHz
40.1MHz ~ 133MHz:
25pF
Frequency Stability*:
±25ppm to ±100ppm
(over operating temperature range) ^{Maximum Capacitive Load CMOS}
Operating Temperature Range
5.0 Volt Supply
Choice of three ranges: 0° ~ +70°C
Part code: ‘C’
1.0MHz ~ 66MHz:
50pF
-20° ~ +70°C
Part code: ‘D’
66.1MHz ~ 133MHz:
25pF
-40° ~ +85°C
Part code: ‘I’
3.3 Volt/2.7 Volt Supply
Storage Temperature Range: -55° to +125°C
1.0MHz ~ 40MHz:
30pF
Ageing:
±5ppm/year maximum
40.1MHz ~ 100MHz:
15pF
Packaging:
(Ta=25°C, Vdd=2.7V, 3.3V or 5.0V)
Bulk pack or tubed
PRODUCT SELECTION
Output Levels:
Maximum Output Loads
<40MHz:
>40MHz:
TTL or CMOS
30pF (See note opposite)
15pF (See note opposite)
Frequency Operating
Model Number Stability Temperature
(ppm)
Range
Duty Cycle
XOPL91100UC
±100
0°~+70°
CMOS <40MHz:
45/55% maximum
XOPL91050UC
±50
0°~+70°
CMOS >40MHz:
40/60% maximum
XOPL91025UC
±25
0°~+70°
Output Clock Rise/Fall Times: 4ns maximum
XOPL91100UD
±100
-20°~+70°
Power Supply Current:
25mA (unloaded)
XOPL91050UD
±50
-20°~+70°
Standby Current:
10mA typical 50mA maximum
XOPL91025UD
±25
-20°~+70°
Start-up Time:
10ms maximum (from power-on)
XOPL91100UI
±100
-40°~+85°
Power Down Delay Time
XOPL91050UI
±50
-40°~+85°
Synchronous:
T/2ns typical, T+10ns maximum
XOPL91025UI
±25
-40°~+85°
Asynchronous:
10ns typical, 15ns maximum
Output Disable Time
PART NUMBER GENERATION
Synchronous:
Asynchronous:
T/2ns typical, T+10ns maximum
10ns typical, 15ns maximum
(T = frequency period)
Frequency Model No.
Supply
Voltage
Output
Option
Output Enable Time:
100ns maximum
Nominal See table Blank = _{5.0 Volts T = Tristate}
Period Jitter S, 1MHz~133MHz: 8ps typical, 99ps maximum
Period Jitter Peak to Peak
<33.0MHz:
65ps typical, 99ps maximum
Frequency
(MHz)
above A = 3.3 Volts
B = 2.7 Volts
EXAMPLE: 24.8920MHz XOPL91050UDTA
(Enable/Disable
P = Power Down
33MHz~133MHz:
65ps typical, 80ps maximum
Frequency = 24.8920MHz, XOPL91 package, ±50ppm -20°~+70°C,
* The frequency stability parameter is an inclusive figure and
Tristate, supply voltage 3.3 Volts
includes adjustment tolerance at 25°C, stability over operating
temperature range, variations due to load change ±10%, supply
SYNCHRONOUS/ASYNCHRONOUS
voltage change ±10%, first year ageing, shock and vibration.
By default oscillators with Enable/Disable or Power Down functions are
supplied ASYNCHRONOUS. If SYNCHRONOUS operation is required
append ‘SYNC’ to the part number
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: [phone] Fax: [phone] email: [e-mail] web: www.euroquartz.co.uk