XOPL53 Datasheet, PDF (1/1 Pages) EUROQUARTZ limited – FACTORY PROGRAMMED OSCILLATORS

FACTORY PROGRAMMED OSCILLATORS
XOPL53 SERIES
Low Jitter 5mm x 3.5mm SMD
Programmable Oscillators
OUTLINE & DIMENSIONS
DESCRIPTION
The Euroquartz range of factory programmable oscillators provide custom
frequency and specification oscillators within very short lead times. The
parts are very reliable in use and have stabilities from ±25ppm over -40°
to 85°C. In addition to the stability over operating temperature range
customers may also choose from supply voltages of 2.7, 3.3 and 5.0
Volts, Enable/Disable or Power Down functions and output synchronous
or asynchronous .
FEATURES
· Very quick delivery available
· Micro-miniature 5mm x 3.2mm SMD package
· Frequency range 1MHz to 160MHz
· Ultra low jitter @ 1 million samples
· Supply Voltages 2.7 Volts, 3.3 Volts or 5.0 Volts
· Enable/Disable or Power Down options
GENERAL SPECIFICATION
Package Type:
SMD, ceramic, seam-welded lid
Frequency Range
5.0 Volt Supply:
1.0MHz to 160.0MHz
3.3 Volt Supply:
1.0MHz to 160.0MHz
2.7 Volt Supply:
1.0MHz to 160.0MHz
Frequency Stability*:
±25ppm to ±100ppm
(over operating temperature range)
Operating Temperature Range
Choice of three ranges: 0° ~ +70°C
Part code: ‘C’
-20° ~ +70°C
Part code: ‘D’
-40° ~ +85°C
Part code: ‘I’
Storage Temperature Range: -55° to +125°C
Ageing:
±5ppm/year maximum
(Ta=25°C, Vdd=2.7V, 3.3V or 5.0V)
Packaging:
Bulk pack or tubed
Output Levels:
TTL or CMOS
Maximum Output Loads
<40MHz:
30pF (See note opposite)
>40MHz:
15pF (See note opposite)
Duty Cycle
CMOS <40MHz:
45/55% maximum
CMOS >40MHz:
40/60% maximum
Output Clock Rise/Fall Times: 4ns maximum
Power Supply Current:
25mA (unloaded)
Standby Current:
10mA typical 50mA maximum
Start-up Time:
10ms maximum (from power-on)
Power Down Delay Time
Synchronous:
T/2ns typical, T+10ns maximum
Asynchronous:
10ns typical, 15ns maximum
Output Disable Time
Synchronous:
T/2ns typical, T+10ns maximum
Asynchronous:
10ns typical, 15ns maximum
(T = frequency period)
Output Enable Time:
100ns maximum
Period Jitter S, 1MHz~133MHz: 8ps typical, 99ps maximum
Period Jitter Peak to Peak
<33.0MHz:
65ps typical, 99ps maximum
33MHz~133MHz:
65ps typical, 80ps maximum
* The frequency stability parameter is an inclusive figure and includes
adjustment tolerance at 25°C, stability over operating temperature
range, variations due to load change ±10%, supply voltage change
±10%, first year ageing, shock and vibration.
OPERATING LOAD CONDITIONS
Maximum Capacitive Load TTL
5.0 Volt Supply
1.0MHz ~ 40MHz:
40.1MHz ~ 133MHz:
Maximum Capacitive Load CMOS
5.0 Volt Supply
1.0MHz ~ 66MHz:
66.1MHz ~ 133MHz:
3.3 Volt/2.7 Volt Supply
1.0MHz ~ 40MHz:
40.1MHz ~ 100MHz:
50pF
25pF
50pF
25pF
30pF
15pF
PRODUCT SELECTION
Frequency Operating
Model Number Stability Temperature
(ppm)
Range
XOPL53100UC
XOPL53050UC
XOPL53025UC
XOPL53100UD
XOPL53050UD
XOPL53025UD
XOPL53100UI
XOPL53050UI
XOPL53025UI
±100
±50
±25
±100
±50
±25
±100
±50
±25
0°~+70°
0°~+70°
0°~+70°
-20°~+70°
-20°~+70°
-20°~+70°
-40°~+85°
-40°~+85°
-40°~+85°
PART NUMBER GENERATION
Frequency Model No.
Output
Option
Supply
Voltage
Nominal
Frequency
(MHz)
See table
above
T = Tristate
(Enable/Disable)
P = Power Down
EXAMPLE: 24.8920MHz XOPL53050UDTA
Blank = 5.0 Volts
A = 3.3 Volts
B = 2.7 Volts
Frequency = 24.8920MHz, XOPL53 package, ±50ppm -20°~+70°C,
Tristate, supply voltage 3.3 Volts
SYNCHRONOUS/ASYNCHRONOUS
By default oscillators with Enable/Disable or Power Down functions are
supplied ASYNCHRONOUS. If SYNCHRONOUS operation is required
append ‘SYNC’ to the part number
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: [phone] Fax: [phone] email: [e-mail] web: www.euroquartz.co.uk