XOP90 Datasheet, PDF (1/1 Pages) EUROQUARTZ limited – FACTORY PROGRAMMED OSCILLATORS

FACTORY PROGRAMMED OSCILLATORS
XOP90 SERIES
Plastic Encapsulated 14 x 9.8mm SMD
Programmable Oscillators
DESCRIPTION
The Euroquartz range of factory programmable oscillators provide custom
frequency and specification oscillators within very short lead times. The
parts are very reliable in use and have stabilities from ±25ppm over -40°
to 85°C. In addition to the stability over operating temperature range
customers may also choose from supply voltages of 2.7, 3.3 and 5.0
Volts, Enable/Disable or Power Down functions and output synchronous
or asynchronous .
FEATURES
· Very quick delivery available
· Industry-standard 14 x 9.8mm SMD package
· Frequency range 1MHz to 133MHz
· Supply Voltages 2.7 Volts, 3.3 Volts or 5.0 Volts
· Enable/Disable or Power Down options
OUTLINE & DIMENSIONS
GENERAL SPECIFICATION
OPERATING LOAD CONDITIONS
Package Type:
Frequency Range
5.0 Volt Supply:
3.3 Volt Supply:
2.7 Volt Supply:
Plastic (Resin)encapsulated
1.0MHz to 133.0MHz
1.0MHz to 100.0MHz
1.0MHz to 100.0MHz
Maximum Capacitive Load TTL
5.0 Volt Supply
1.0MHz ~ 40MHz:
40.1MHz ~ 133MHz:
50pF
25pF
Frequency Stability*:
±25ppm to ±100ppm
Maximum Capacitive Load CMOS
(over operating temperature range)
5.0 Volt Supply
Operating Temperature Range
1.0MHz ~ 66MHz:
Choice of three ranges: 0° ~ +70°C
Part code: ‘C’
66.1MHz ~ 133MHz:
-20° ~ +70°C
Part code: ‘D’
3.3 Volt/2.7 Volt Supply
-40° ~ +85°C
Part code: ‘I’
1.0MHz ~ 40MHz:
Storage Temperature Range: -55° to +125°C
40.1MHz ~ 100MHz:
Ageing:
±5ppm/year maximum
50pF
25pF
30pF
15pF
Packaging:
(Ta=25°C, Vdd=2.7V, 3.3V or 5.0V) _{PRODUCT SELECTION}
Bulk pack or tubed
Output Levels:
Maximum Output Loads
<40MHz:
>40MHz:
Duty Cycle
CMOS <40MHz:
CMOS >40MHz:
Output Clock Rise/Fall Times:
Power Supply Current:
Standby Current:
Start-up Time:
Power Down Delay Time
Synchronous:
TTL or CMOS
30pF (See note opposite)
15pF (See note opposite)
45/55% maximum
40/60% maximum
4ns maximum
25mA (unloaded)
10mA typical 50mA maximum
10ms maximum (from power-on)
T/2ns typical, T+10ns maximum
Model Number
XOPL90100UC
XOPL90050UC
XOPL90025UC
XOPL90100UD
XOPL90050UD
XOPL90025UD
XOPL90100UI
XOPL90050UI
XOPL90025UI
Frequency
Stability
(ppm)
±100
±50
±25
±100
±50
±25
±100
±50
±25
Operating
Temperature
Range
0°~+70°
0°~+70°
0°~+70°
-20°~+70°
-20°~+70°
-20°~+70°
-40°~+85°
-40°~+85°
-40°~+85°
Asynchronous:
10ns typical, 15ns maximum
Output Disable Time
Synchronous:
Asynchronous:
T/2ns typical, T+10ns maximum
10ns typical, 15ns maximum
(T = frequency period)
PART NUMBER GENERATION
Frequency Model No.
Supply
Voltage
Output
Option
Output Enable Time:
RMS Jitter
1MHz~33MHz:
33MHz~133MHz:
100ns maximum
±50ps maximum
±40ps maximum
Nominal
Frequency
(MHz)
See table
above
Blank = 5.0 Volts
A = 3.3 Volts
B = 2.7 Volts
EXAMPLE: 24.8920MHz XOP90050UDTA
T = Tristate
(Enable/Disable
P = Power Down
* The frequency stability parameter is an inclusive figure and includes
adjustment tolerance at 25°C, stability over operating temperature
Frequency = 24.8920MHz, XOP90 package, ±50ppm -20°~+70°C,
Tristate, supply voltage 3.3 Volts
range, variations due to load change ±10%, supply voltage change _{SYNCHRONOUS/ASYNCHRONOUS}
±10%, first year ageing, shock and vibration.
By default oscillators with Enable/Disable or Power Down functions are
supplied ASYNCHRONOUS. If SYNCHRONOUS operation is required
append ‘SYNC’ to the part number
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: [phone] Fax: [phone] email: [e-mail] web: www.euroquartz.co.uk