XOP1000 Datasheet, PDF (1/1 Pages) EUROQUARTZ limited – 14 pin Dual-in Line

EURO QUARTZ _{EQXOP-1000 Programmable Oscillators}
14 pin Dual-in Line
Freq: 1.0MHz to 133.0MHz
Features
Very quick delivery
Industry-standard 14 pin DIL package
Supply Voltage 2.7V, 3.3V or 5.0Volts
Enable/Disable or Power Down options
OUTLINE & DIMENSIONS
Description
EQXOP-1000 programmable oscillators provide custom
frequency and specification oscillators with a very quick
delivery time. Jitter, general performance and specification is
comparable to discrete frequency oscillators.
Electrical Specification
Frequency Range:
1.000MHz ~ 133.0MHz
Frequency stability:
from ±25ppm to ±100ppm
Operating Temperature Range:
0° ~ +70°C
Part Code 'C'
-20° ~ +70°C
Part Code 'D'
-40° ~ +85°C
Part Code 'I'
Storage Temperature Range:
-55° ~ +125°C
Ageing:
±5ppm per year max.
Packaging:
Bulk packed or Tubed
Output Levels:
CMOS or TTL
Maximum Output Loads:
Below 40MHz: 30pF
Above 40MHz: 15pF
(See note opposite)
Duty Cycle:
Below 40MHz: 45/55% min.
Above 40MHz: 40/60% min.
Rise/Fall Times:
4ns max.
Supply Current:
25mA (unloaded)
Standby Current:
10µA typical, 50µA max.
Start-up Time:
10ms max.
Power Down and Disable Delay Time
Synchronous:
T/2ns typical, T +10ns typical
Asynchronous:
10ns typical, 15ns maximum
(T - frequency period)
Output Enable Time:
100ns maximum
RMS Jitter:
1MHz ~ 33MHz:
50ps maximum
33MHz ~ 133MHz: 40ps maximum
Operating Load Conditions
Maximum Capacitive Load TTL
5.0 Volt Supply
1.0MHz to 40MHz:
40.0MHz ~ 133MHz:
50pF
25pF
Maximum Capacitive Load CMOS
5.0 Volt Supply
1.0MHz to 66MHz:
50pF
66.1MHz to 133MHz: 25pF
3.3 Volt/2.7 Volt Supply
1.0MHz to 40MHz:
30pF
40.0MHz to 100MHz: 15pF
Model Selection Guide
Part Number Example: 24.890MHz EQXOP-1100UCTA (see Part Numbers table)
24.890MHz EQXOP-1100 U C T A
Frequency
Series Designation
EQXOP-1***
Stability over Temp.
100 = ±100ppm
050 = ±50ppm
025 = ±25ppm
Supply Voltage
Blank = 5.0 Volts ±5%
A = +3.3 Volts ±5%
B = +2.7 Volts ±5%
Output Option
T = Enable/Disable or
P = Power Down
U = CMOS/TTL Output
Operating Temp. Range
C = 0° ~ +70°C
D = -20° ~ +70°C
I = -40° ~+85°C
Synchronous/Asynchronous
By default, Euroquartz produce Enable/Disable
and Power Down function oscillators as
ASYNCHRONOUS. If SYNCHRONOUS operation
is required (see above specification for details,)
append 'SYNC' to part number.
Part Numbers
Model
Number
Operating
Stability Temperature
Range
EQXOPL-1100UC
EQXOPL-1050UC
EQXOPL-1025UC
EQXOPL-1100UD
EQXOPL-1050UD
EQXOPL-1025UD
EQXOPL-1100UI
EQXOPL-1050UI
EQXOPL-1025UI
±100
±50
±25
±100
±50
±25
±100
±50
±25
0° ~ +70°C
0° ~ +70°C
0° ~ +70°C
-20° ~ +70°C
-20° ~ +70°C
-20° ~ +70°C
-40° ~ +85°C
-40° ~ +85°C
-40° ~ +85°C
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: [phone] Fax: [phone] Email: [e-mail] www.euroquartz.co.uk